The durability of floor installation depends on the installation quality. Bian Xiao today tells you about the installation of solid wood flooring and the places that need attention. The humidity of the floor will change subtly with different places and seasons. The average moisture content of solid wood flooring is between 10%- 12%. According to these data, when Fuzhou solid wood floor is installed, the gap between boards should be between 0.3 mm and 0.8 mm. When the moisture content is stable, the "curing" season of the floor is different from the installation season, which will also have a subtle influence on the moisture content.

In order to make the floor absolutely safe in future use, the standard spacing of joints needs more detailed space. If it is a sanitary round bean solid wood floor, the gap between the boards should be 0.5-0.8 mm in winter, because the water content of the sanitary floor in winter is low, and some of the floors installed in winter will shrink due to low temperature, so the installation gap is relatively large; If it is rainy season and winter, the gap will be slightly smaller, almost between 0.3 and 0.5 mm; Keep in good health in rainy season. Generally, the floor installed in rainy season does not need to be left, otherwise it will shrink in winter and affect the appearance. "Three-point floor, seven-point installation" has become a recognized view in the industry.

In the past three years, the owner mainly asked the floor supplier to provide the installation workshop pasting service. Because the floor installation needs strong professionalism, you should be familiar with the floor installation personnel, water content and curing period. For provincial brands or local brands, their installers have a better understanding of the moisture content and curing period of products, and the gap control between plates is more reasonable during installation.

The main reason for this situation is that the gap between the floor and the wall root and the gap between the plates are not well controlled during the installation operation, which makes the floor wet during the rainy season and there is not enough expansion space, resulting in the floor finally being squeezed and arching. In winter, the cold shrinkage of solid wood floor will form an excessive gap between plates. At this time, the floor lacks stress points and will warp under the condition of rapid drying. It can be said that all mistakes are caused by improper gap! According to a number of people in the flooring industry, whether the merchants send personnel to install it or the owners find "roadside workers" to install it themselves, generally these workers will uniformly leave bags or cards between the plates, and the thickness of the bags or cards is used as the standard of plate spacing. There are also many workers engaged in floor installation all the year round, mainly relying on visual inspection and experience to control the size of the gap between the control board and the board.