Method 1:

1. Find the center of shoes and uppers and mark them.

2. Align the center of the vamp with the center of the sole, and naturally hold the sole and vamp with both hands. Don't miss the middle point. Look at the picture and start the injection.

3. The toe should be slightly shrunk, so that the inside of the shoe will be empty, easy to wear and beautiful. The toe is the stress point. This is also relatively solid. It's like this after sewing.

4. Start positioning the heel. Taking the center point as the midpoint and leaving equal distance on both sides is basically the place where the soles of the feet bend.

5. Two needles go to both sides and start to connect the vamp and the sole. I used a clip, which is stronger.

6. Start sewing the lining of shoes. Our lining here is the kind of cloth similar to high count cashmere. Better warmth and durability. First position the heel.

7. The head of the shoe lining should also shrink slightly, and the toe should be sewed more densely. Bend the sole and turn the upper over. The sole is a wear-resistant foam sole, which will not break and can be turned over and over. Sew the raw edges of shoes. After a few details, it becomes a pair of warm and comfortable shoes.

Method 2:

1. Fix the upper on the sole, and fix it from front to back with clips.

2, choose the position of the needle, generally choose the inside of the shoe.

3. Take the first stitch from the hemming strip at the found stitch position, and tie it directly on the sole with an awl.

4. Hook the thread on the awl, pull out the awl, and pull out the thread.

5. Place the second needle at the position of the first needle 1 cm, unfold the thread and hook it on the awl, pull out the awl and pull out the thread.

6. Thread the thread through the small circle drawn by the second needle.

7. Tighten the two ropes with both hands.

8. Keep it up, lick the shoes. Finally, tie the two ropes at the bottom of the shoes and subtract the extra ropes, so that the shoes will be licked.

Advantages and disadvantages of handmade cotton slippers;

1, advantages:

(1) Handmade slippers are mainly crocheted with wool and hand-woven with pure cotton wool. They are comfortable, practical, soft and breathable. The soles of slippers are made of wear rubber soles, which are durable, waterproof, non-slip, warm and comfortable.

The stitch of the sole of the mechanism is very big, and if one of them is worn out, the whole pair of shoes will fall apart. In order to adapt to the machine, the sole is generally thin and hard, with poor elasticity and flexibility.

(2) The colored thread is made of insole with neat concave and convex objects, which has the functions of health care, health preservation and blood circulation promotion. Breathable, sweat-absorbent, moisture-proof, odor-proof, long-term wearing feet will not deform, protect soft tissues, and truly achieve "health care first."

(3) It does not contain any chemical components, and is natural, green and environmentally friendly.

2. Disadvantages: the appearance is not beautiful and fashionable enough; Shoes will be biased, and you will feel heavy when you walk.