The main maintenance of wooden doors When removing the stains on the surface of wooden doors, wipe them with soft cotton cloth, which is easy to be scratched by hard parts.

When the stain is too heavy, you can use neutral lotion, toothpaste or special cleaning agent for furniture, and then dry it with cotton cloth after removing the stain.

Note: Do not leave the rag soaked with neutral reagent or water on the wooden door surface for a long time, otherwise it will damage the surface and make the surface facing material discolor and peel off.

Note: Do not rub the edges and corners of the wooden door excessively, otherwise the paint on the edges and corners will fall off.

Hinges and locks are movable parts. When they are loose, they should be tightened immediately. Pay attention to the noise at the hinge position in time. If the lock is not flexible when unlocking, you can add a proper amount of pencil lead foam to the key, and you can't just fill it with oil.

Because wood has the characteristics of dry shrinkage and wet expansion, under the condition of high temperature and high humidity, there will be slight deformation and contraction occasionally. This is a normal natural phenomenon, so there is no need to panic. With the change of seasons, this phenomenon will naturally disappear.

In order to keep the bright color of wooden doors, wax them regularly; Of course, this is also a good way to extend the service life.

Selected ecological doors of Jane Eyre 1. Look at the material. The selection of ecological door mainly starts with hardware structure and materials. Most of them are made of metal, which contains no formaldehyde and can be recycled. Reaching these standards is called "ecological gate".

2. Look at the door cover and door edge of Al-Mg-Ti alloy; Al-Mg-Ti alloy is mostly used in the door cover and door edge of ecological door, and the surface is anodized. The hardness is above 12 degree, which is wear-resistant and pressure-resistant, and will never deform and fade.

3. Look at the imported decorative boards 100% pure environmental protection, mainly fire-proof boards and metal plates. These materials have the characteristics of environmental protection, minimal water absorption, no scratches and good wear resistance.