The function of solid wood dining table and chair: after painting, the solid wood puzzle has no uneven glue seams and slats on its surface, and its physical properties are relatively stable during long-term use;
The utilization rate of wood is high, which accords with the principle of ecological utilization of raw materials. Therefore, in terms of use and texture color, the solid wood mosaic decorative board is more suitable for the use and decorative function of furniture.
Although the sizing amount of solid wood panel is larger than that of solid wood wide panel, it is more environmentally friendly and healthier because of the protection of double-sided thick veneer and the fact that there are only eight glue seams on both sides and four sides of four-sided thick veneer.
Features of solid wood dining tables and chairs: solid wood dining tables and chairs are mainly made of solid wood wide plates. The wide splicing of solid wood refers to the board made by processing hardwood into narrow strips (about 3-6cm, and a small amount of wide strips), then gluing and splicing horizontally, and then sanding up and down; Solid wood glulam refers to the boards made by connecting narrow and short strips of wood with adhesive (some boards are connected with teeth) and then widening the upper and lower sides horizontally and sanding; Solid wood splicing refers to the board made of narrow strips with small wood specifications, which is horizontally glued and sanded up and down, and then pressed up and down to cut the hardwood with good wood properties into veneers; The technology of wide splicing of solid wood is basically the same as that of solid wood laminated wood, but because of the small material specification, there are more splicing in the length direction; The disadvantages of solid wood glulam are often more prominent, but the advantages are far from there, and the sizing amount is much higher than that of solid wood wide mosaic.
Daily maintenance of solid wood dining tables and chairs: solid wood dining tables are favored by people, but how to do daily maintenance and maintenance of the dining tables? The biggest advantage of solid wood dining table and chair lies in its natural wood grain and changeable natural color. Because solid wood is a breathing organism, it is recommended to place it in an environment with suitable temperature and humidity, and at the same time, avoid placing drinks, chemicals or overheated objects on the surface to avoid destroying the natural color of the wood surface. If it is a melamine board with a lot of dirt, it is recommended to wipe it with a neutral detergent diluted with warm water first, and then wipe it with clear water. Remember to wipe off the residual water stains with a soft dry cloth, and then polish them with maintenance wax. Even if you are done, only by paying attention to daily cleaning and maintenance can wooden furniture last forever.
Selection method of solid wood dining table and chair;
(1) material: the material used for the leg column is the key, and there can be no splitting, moth-eaten and rot. Each leg column should be on the same horizontal plane, flat and firm, and should not be shaken lightly.
(2) Structural modeling: The structure should be straight, in line with people's visual habits, and cannot be skewed. The tenon should be tight, the structure should be firm, and it should not shake, deform or crack, and the bonding place should not be degummed or loose. The joint should be tight, without unevenness and beautiful appearance.
(3) Paint surface: the paint surface is smooth, colorful, fresh and pleasing to the eye, free from sagging, foaming, wrinkling, white spots and other defects, and the pattern should be clear, consistent, symmetrical and harmonious.