1. Basic design requirements for rural villas: 1, with a construction area of about130m2, but no more than150m2. The total construction area is no more than 280 square meters, and the house is east-west, regardless of the back door. There are 4 bedrooms and 2 study rooms on the second floor. On the first floor, parents often live there. There should be a living room, master bedroom, kitchen, dining room, garage, study on the second floor, two bedrooms and a terrace on the first floor. The living room on the second floor is equipped with a sofa and TV for leisure use. . 3. Each floor should have a bathroom, so it is suggested to arrange the bathroom between two bedrooms. The master bedroom can be decorated with a master guard, but there must be a wardrobe. Stair number four. There is a bedroom, study and terrace on the third floor. The third floor should be equipped with laundry table, water storage bucket (pool) and solar energy. Besides, I plan to add a storage room. 5, to conform to the traditional feng shui layout. 6. Due to the limited economic conditions in rural areas, please consider economy, practicality, atmosphere and comfort when designing. The budget for building embryo houses is about 200,000. 7. My home is 18 meters long from north to south and 16 meters long from east to west, with an area of about 300 square meters. There is a toilet in the southeast corner. There are mountains in the northeast and mountains in the southeast, so lighting will not affect it. Please fully consider the geographical environment to design it. 2. Design requirements: 1, and the design needs to be a personalized scheme that conforms to my design concept. 2. Design data: The design description explains the design reasons, and the design drawings are detailed, which is convenient for construction. 3. The designer shall refer to the floor plan and local renderings first, and must provide a full set of renderings, construction drawings, water and electricity layout drawings, water supply and drainage pipeline drawings, etc. After winning the bid. Three. Information to be provided: 1, plan and elevation: detailing the names of all working areas and functional areas; When the height difference changes, the elevation and area of each room should be marked. 2. It is best to clearly see the walls, floors and ceilings from all angles in the renderings; The effect diagram should include the effect of each room (furniture, electrical appliances, lighting) and channel; It's made with 3D software. 3. A set of detailed construction drawings (CAD format). 4. Main construction techniques and construction precautions shall be attached.