Many people in modern times like to stay in air-conditioned rooms in summer or take a bath late at night and eat some frozen food, which leads to excessive cold and humidity in their bodies. Steaming in a steaming room is the best choice for such people. Sweating can better sweat, remove dampness and coldness in human body, eliminate toxins, accelerate blood circulation in the body and purify the internal environment of human body. In recent years, the installation and construction of steam rooms are extremely hot. Let's get married, and sweep some conditions of steam room installation and some problems that need attention for your reference.

Necessary conditions for installing steam chamber:

First of all, the shell has reached the installation standard of the steaming room.

Second, there must be sufficient power supply capacity, and the incoming line should not be less than 10 square meter.

Third, lightning protection grounding wire must be installed.

Fourth, express the closed route and installation position of the electric cabinet.

5. The house meets the standard conditions stipulated by the local safety fire department.

On June 28th, 2009, the review meeting of "Technical Specification for Steam Health Room" and "Specification for Key Materials of Steam Health Room" in China led by the Ion Technology Expert Committee of China Private Science and Technology Promotion Association was held in Beijing. The formulation of the two "Specifications" is the first technical specification of the steam room industry in China, which has pioneered the standardization and scientificity of steam rooms. The scope specified in this specification includes the basic indicators and spatial indicators of the steaming room, determines the key indicators such as the negative ion concentration of the steaming room, and makes specific material selection specifications for the key materials of the steaming room.

Solved the leakage phenomenon of the steam room;

1, electric heating film should be produced by regular enterprises.

2. The wear of electrothermal film is inevitable during transportation. Before laying the electrothermal film, it is necessary to carry out the damage inspection experiment. Every tiny leak, even if it is only the size of a needle tip, may cause a fire in the future.

3. Clean the ground when laying the electric heating film. There can be no sand on it, and you can't wear shoes on it.

4. When wiring, find a specially trained electrician to connect each head firmly and fix it.

Materials needed to build a steam room:

A. Functional materials include: ultrafine single crystal tourmaline powder (tourmaline powder), which must be used, but ordinary tourmaline powder is invalid; Negative ion energy powder, germane backrest, crystal salt, tourmaline floor, etc.

B. Electric heating materials: mainly electric heating film, temperature controller, waterproof tape, etc.

C. Building installation materials: mainly including insulation board, waterproof board, batten, stool board, bamboo curtain, etc.

D. Auxiliary equipment: TV, stereo, humidifier, etc.

The above article introduces the installation conditions of the steaming room and some problems that should be paid attention to. The emergence of steaming room has largely solved the problem that many people are troubled by-wet and cold constitution. It provides a safety barrier for our health. In our spare time, we can go into the steaming room to experience sweating, eliminate toxins in the body, purify the internal environment of the human body and reduce the probability of cardiovascular and cerebrovascular diseases. Promote human health. I hope the steaming room can bring you a brand-new life experience.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~