1, to do a good job in design planning, you can find some other kinds of cooktops online for reference, or you can go to your neighbor's house to see more cooktops made by carpenters, because the appearance of ceramic tile cooktops is the same as that of cooktops made of other materials, but the borders are different, so just find a good reference and do it.

2. After the planning, first use cement bricks to lay the foundation. The total height of the furnace can be set at will. The conventional height is 80cm, and the table top width is 60cm. It is suggested to use cement bricks to lay three floors. Next, do some statistics to calculate the number of vertical tiles (two tiles are clamped back to back with structural adhesive to make the tiles become three overlapping edges) and the number of tiles laid. Because the total width of the countertop is at most 60, the width of the vertical brick should be subtracted from the hanging edge thickness of the artificial stone countertop (1.5cm) and the cupboard door (1.5cm) and 2cm (cupboard door and countertop).

3. Cover the cut ceramic tile with cement at the bottom of the paved cement brick, and then clamp a ceramic tile for column back to back with structural adhesive, waiting for curing. Stick the vertical tile on the bottom tile with structural adhesive, because only structural adhesive is used here, and the curing time of this adhesive needs at least 12 hours, so wait. Friends who have used marble glue can fix it with marble glue if they want to hurry.

4. When the standing tiles are fixed, lay a layer of tiles on them. After laying a layer, you can put another layer on it with cut broken tiles to increase the height of the countertop. Next, customize the countertops and doors.