The design process of:

First, open the required material network, and then search for the Yi Labao or poster design you want to do.

Download pictures such as poster design as needed.

Then use software tools to open, modify and organize into the desired picture.

Installation of Yi Labao:

Yi Labao is usually.

bottom

there is a

roll

, and

spring

Advertise when not in use.

design

Roll it back into the bucket. When you need to use it, pull out the cloth cover and support it with the stick at the back. When you need to use Yi Labao, you can follow the following steps:

A. Turn the "Yi Labao" foot about 90 degrees and place it downward.

B. Remove the sticky paper from the guide rail of "Yi Labao" painting axis, align and paste the finished picture, and align both ends to make it flat.

C. Open the plastic cover at one end of the picture hanging strip and take out the hard plastic core strip (1 cm wide) in the middle.

acrylic foam tape

Stick the hard plastic core strip on the screen.

hard-working

The upper edge of the), fold it and put it back in the metal tube, and cover it with a plastic cover.

D, press one end of the bottom, pull the picture strip by hand, and pull out the ring on the end face of Yi Labao.

door bar

, slowly put the picture into "Yi Labao" (Note: you must pull the picture hanger and the picture first, and then pull it out).

E. when in use, take out and connect the three-fold metal rod placed in the Yi Labao, insert one end of the metal rod into the plastic opening of the Yi Labao triangle, then slowly pull out the picture and hang the hook of the picture hanging strip on it.

metal

connecting link

Only the top.

F. if you need to change the map, pull the map.

Chuhou

Insert the bolt into the original fixing hole,

Fixed the picture.

, and then repeat the operation process of steps a to d 80cmx200cm Yi Labao screen size: 79x200cm (Note: the screen size is 1cm at the top and 2cm at the bottom).

Use of Yi Labao:

A. Take out the Yi Labao and take out the main pillar;

B: Put these two at the bottom of Yi Labao.

support

Open it and make it stand upright on the ground;

C, installing the main pillar and the bottom bracket;

D, draw a net picture to connect it with the main support;

E. adjust the installation picture to make it smooth and beautiful.