1, select moisture-proof floor.
Moisture-proof performance is the most important technical index of sports wood flooring. The floor with poor moisture-proof performance is steamed and baked in geothermal for a long time. Once moisture enters, the edge of the floor will definitely tilt up, causing damage to the floor. High-quality floor adopts high-density base material, which has excellent moisture-proof performance and water absorption thickness expansion rate is far less than the national standard. In addition, the special wear-resistant layer, decorative paper and balance layer can "seal" the substrate well and ensure the better moisture-proof performance of the whole floor.
2, the correct installation of moistureproof
The installation of sports wooden floor determines 70% floor quality. The unsatisfactory use of the floor is largely caused by the inadequate floor paving, and the floor paving problem has become a stubborn disease that restricts the use of the floor. The installation engineer of the sports wood floor must make four different measurement preparations, which can enhance the accuracy and precision for the later construction, and can effectively detect the specific degree of the five major problems of sand, moisture, bumps and cracks on the ground. In addition, the staff should pay special attention to the flatness of the ground. If the ground is flat, there will be no arch under the floor. If the ground is not wet, will the floor swell? This should be carefully tested.
3. Control indoor humidity
In the rainy season, the temperature and humidity of the air change, and the floor is easy to expand or contract. Controlling indoor humidity is the most scientific and effective method to prevent the deformation and arching of solid wood sports floor. The insiders suggest that the floor can be directly humidified with a non-dripping mop, or closed with a humidifier. You can also open the window to adjust the indoor air in the afternoon or at night when the climate is dry, so as to make indoor intermittent ventilation.