Microscope mainly refers to the lens, which is considered to be more differentiated in the whole TV video microscope, equivalent to its core. Some good lenses are imported from abroad. Of course, with the rapid improvement of domestic economy, domestic lenses are gradually reaching the world level.

The universal bracket is a frame for supporting microscope lens, monitor and camera. Below is the iron plate, above is the stainless steel tube, one bracket supports the monitor, and the other bracket supports the microscope and camera. This is the basic structure of TV video microscope.

In addition, the use of TV video microscope can be roughly divided into four parts:

First, prepare several large pieces of TV video microscope, and then assemble the universal bracket. It should be noted here that the bracket for the lens and camera should be below, and the bracket for supporting the monitor should be placed above for easy observation.

Second, install the lens on the universal bracket, and install it round and round, just to fix the lens. The lens is fragile, so be careful when installing it, and then install the camera on the lens and plug it in where there is an interface diameter. This step is very important, so be careful.

Third, after the bracket and lens are installed, fix the monitor. After fixing, connect some link lines. That's all.

Fourthly, if you feel dim after completing the previous steps, you can also install a light source on it, so that you can have enough light to observe the product.