①P Parking gear: Only when the car stops can it be put into gear. To exit the selected gear lever, press the brake pedal and start the starting motor.

②R reverse gear: When the vehicle has to turn, engage reverse gear. Please note that the vehicle must stop before engaging in reverse gear.

③N Neutral: When the torque converter is at high speed, power cannot be transmitted to the gear transmission, and neutral is used for short-term parking.

④D forward gear: All forward gears can be shifted into high gear and downshift automatically, and the gear shift always depends on the engine load of the car, my safe driving design style and driving speed.

⑤S fitness gear: In S gear mode, the transmission can shift gears at will. During the whole driving process of the car, the shift lever immediately sends the S gear, which is generally used for uphill and high-speed driving.

⑥M manual gear: If you change to this gear, you can manually raise or lower the gear of the vehicle, which is more convenient to meet all kinds of roads and enhance the driver's feeling.

⑦B Brake system gear: also known as mechanical energy recovery gear, which generally appears on hybrid or pure electric vehicles. It can also improve the endurance of the vehicle after being put into gear, and at the same time, it can reasonably brake the vehicle when going downhill for a long time.

Practical operation method of Toyota C-HR shift

1, application of paddle shifting

In the "D" position, press the brake pedal and then push the door handle to the right to change the manual mode. At this time, the elevator gear can be developed according to the ""and "-"tabs of the automobile steering wheel. Manual mode is more suitable for specific driving conditions and accurately controls the torque and speed of the vehicle.

2. Gear selection under different road conditions

① Starting uphill: This road must be intervened with great torque, and books can be made with "D-". If enough power is found, "D" should be used to perform an upshift to maintain the transmission and the automobile engine. Assuming steep slope, manual downshift or insufficient power, S gear is required.

② Downhill: It is recommended to use "D" for upshifting, 3rd gear for gentle slope and 2nd gear for slope, so as to maintain the brake pads of the automobile in advance without being damaged. The high torque of 2nd or 3rd gear without 1 gear can also meet the power requirements. Similarly, if the vehicle slips faster and faster, it also needs to be downshifted according to "D-".