1. Treadmill power switch failure: Treadmill switch cannot be started or turned off, which may be caused by poor contact, damaged switch or short circuit. At this time, it is necessary to check the power supply circuit and switch.
2. Screen display failure: If the treadmill display fails, such as the display is garbled, distorted or not bright, it may be that the line of the screen is damaged or the circuit board is faulty, and it is necessary to replace parts or repair the circuit board.
3. Vibration or noise failure: If the treadmill has excessive vibration or noise during use, it may be caused by unstable contact between the base and the ground, wear and aging of equipment parts, etc. , parts need to be replaced or adjusted.
4. Running belt stuck: Long-term use or improper maintenance of running belt may lead to running belt stuck and affect the normal use of treadmill. At this time, it is necessary to check the tension of the running belt and the lubrication of the tire roller, and carry out maintenance or replacement in time.
5. Motor failure: Motor failure is a serious failure in the use of the treadmill, which may be caused by motor circuit damage or motor burning. Need to replace the motor or detect circuit problems.
In a word, although Inred treadmill has few faults, it still needs daily maintenance and timely inspection and troubleshooting to ensure its long-term stable use.