SHOY-5A oxygen bar oxygen generator adopts split structure, and the main oxygen generator is installed outdoors. Its indoor terminals are output nozzles with self-sealing interfaces and plugs with flow-limiting holes, the number of which can be up to three sets according to the needs of indoor rooms, and they are connected to the outdoor oxygen generator and the indoor terminal output nozzles through oxygen supply conduits, and the indoor air extraction purifier is connected to the air inlet interface of the outdoor oxygen generator through conduits.
The oxygen bar oxygen generator starts to work through the radio remote controller. The indoor air is filtered by the suction purifier and then enters the outdoor host. The prepared oxygen is input into the output connectors of each terminal in the room through the oxygen supply pipeline. When a plug with a limited flow hole is inserted, a limited amount of oxygen is supplied to the room. If the nasal oxygen tube is connected when the humidifier with plug is inserted, people can breathe. The main oxygen generator sucks indoor air through the indoor air extractor, and at the same time promotes indoor air renewal and ventilation, thus improving indoor air quality.
SHOY-5A oxygen bar outdoor oxygen generator is equipped with heating and insulation device, which can work at-30℃.