First of all, EC fault refers to "abnormal current fault", which is usually caused by the motor or power failure of the treadmill. When an EC fault occurs, the running machine will automatically stop running and the error code on the display screen will flash.
How to solve EC fault? Here are some possible solutions:
1. Check the power supply: make sure that the treadmill is connected to a stable power supply, and try not to use extension cables such as socket dragging plates to avoid voltage instability.
2. Check the motor: check whether the motor is running normally. If the motor fails, it may need to be replaced or repaired.
3. Check the electronic hardware: If there are no problems in the above two aspects, it may be that the electronic hardware has failed. You can try to reconnect the device or replace the damaged parts.
4. Reset the treadmill: Sometimes, restarting the treadmill can solve the EC fault. The specific method is: turn off the treadmill and wait for a few minutes before turning on the power.
In short, when there is an EC fault, we should first eliminate basic problems such as power supply and check whether the motor and electronic hardware are working normally. If the problem cannot be solved, you need to contact professional maintenance personnel for maintenance. At the same time, in order to ensure the long-term use of the treadmill, it is recommended to carry out regular maintenance, such as cleaning and lubricating the treadmill.