Treadmill is a very practical fitness equipment, and many people choose to use it for aerobic exercise at home or in the gym. Once the treadmill is turned off, it will not only affect the exercise effect, but also cause physical harm to the bodybuilder. So we need to know how to deal with the stall protection of treadmills.

First of all, what is treadmill stall protection? Treadmill stall protection means that when the treadmill fails or is abnormal, it automatically stops running to protect the safety of athletes. For example, if the running speed of the treadmill exceeds the set range, the treadmill is overloaded and the motor of the treadmill fails, the treadmill will automatically stop.

Next, let's take a look at how to deal with the stall protection of the treadmill:

1. Observe the fault prompt screen.

When the treadmill stops running, observe whether there is a fault prompt message on the screen. If it appears, follow the prompt information.

2. Check the track of the treadmill

The track of the treadmill is the key to the normal operation of the treadmill. If dust and other sundries accumulate, the friction of the treadmill will increase, which will affect the effect and operation. Therefore, it is necessary to clean the track of the treadmill regularly to ensure the smooth operation of the treadmill.

3. Check the treadmill sensor.

Due to dust or other factors, the treadmill sensor may fail, which may cause the treadmill to stall. At this time, it is necessary to check whether the sensor works normally, clean and replace the sensor.

4. The room temperature is too low or too high

In the low temperature environment, the lubricating oil will solidify and harden, leading to an increase in friction; In high temperature environment, poor heat dissipation of the motor may also lead to failure. At this time, it is necessary to adjust the room temperature to ensure the normal operation of the treadmill.

5. Check the data cable connector.

The data cable may fall off during use, causing the treadmill to stall. At this time, it is necessary to check whether the data cable connector is connected correctly and plug it in again.

In a word, the stall protection of treadmill is a very important safety protection function. When the treadmill shuts down, it needs to be handled in time to avoid hurting the bodybuilder. If you are not sure how to handle it, it is recommended to ask a professional to repair it.