Treadmill is one of the fitness equipment commonly used by modern people. It can provide users with the effect of aerobic exercise and burning fat, and has become one of the essential equipment in the gym. However, treadmills also have some problems, such as poor speed. This paper will introduce the methods and solutions to detect the speed fault of treadmill.

Detection method of speed fault of treadmill;

1. Observe the display screen of the treadmill: The display screen of the treadmill usually shows the current speed, distance, time and other information. If the speed display is abnormal, it is necessary to eliminate the possibility of electronic equipment failure.

2. Check the power supply of the treadmill: If the treadmill has no power supply, the treadmill will not work normally, which will also lead to speed failure. Therefore, we can check whether the power plug is plugged tightly and whether the power cord is damaged.

3. Check the treadmill chain: The treadmill chain is connected with the motor and driving wheel of the treadmill, so the wear, bending or looseness of the chain will lead to the speed failure of the treadmill. We can check whether the chain is cracked or broken, and we can also clean and refuel it.

4. Check the motor: The motor is one of the most important parts of the treadmill. If the motor burns out or has poor contact, it will lead to the speed failure of the treadmill. We can check whether the motor works normally, whether the motor is overheated, whether the wire connection is bad, whether the motor capacitor is damaged, etc.

5. Check the drive belt: the drive belt is an intermediate part between the drive wheel and the treadmill motor. If the drive belt is loose or worn, it will lead to the speed failure of the treadmill. We can observe whether the belt is uniform, elastic and cracked.

Solution to speed fault of treadmill;

1. Check the instructions before pedaling to ensure the correct methods and steps to operate the treadmill, so as to avoid failure caused by improper operation.

2. Cleaning and maintenance: always clean the surface and inside of the treadmill, and clean the gaps, tracks and chains. Oil droplets and dust will reduce the performance of the treadmill and increase the failure rate.

3. Replace consumable parts in time: treadmills are frequently used, and some consumable parts, such as treadmills belts and transmission belts, should not be replaced when they are damaged. Replace it in time to ensure the normal operation of the treadmill.

4. Contact maintenance personnel: Before replacing consumable parts, it is recommended to contact after-sales personnel or professional technicians to provide you with inspection and maintenance services for treadmill failures.

In short, the speed failure of the treadmill is a common problem. If there is a speed fault on the treadmill, it needs to be eliminated in time to ensure the normal operation of the treadmill and avoid unnecessary troubles and losses to users. Through the above methods and solutions, users can quickly find the cause of the fault and take effective measures to repair it in time.