The procedure is too complicated: the first procedure, the trial first. According to the law. Ministry of Public Security 106: Article 13: In crowded places under any of the following circumstances, the construction unit shall apply to the fire department of the public security organ for fire control design review, and after the construction project is completed, apply to the fire department of the public security organ for fire control acceptance: (1) stadiums, auditoriums, public exhibition halls and museum exhibition halls with a total construction area of over 20,000 square meters; (2) Civil airport terminals, passenger station waiting rooms and passenger station waiting rooms with a total construction area of 15000 square meters or more; (3) Hotels, restaurants, shopping malls and markets with a total construction area of over 10,000 square meters; (4) theaters, public library reading rooms, business indoor fitness and leisure places, hospital outpatient buildings, teaching buildings, university libraries and canteens, production and processing workshops of labor-intensive enterprises, temples and churches with a total construction area of more than 2,500 square meters; (5) Children's rooms in nurseries and kindergartens with a total construction area of 1000 square meters or more, indoor places for children's activities such as children's playrooms, ward buildings in nursing homes, welfare homes, hospitals and sanatoriums, teaching buildings, libraries and canteens in primary and secondary schools, dormitories in schools and dormitories for workers in labor-intensive enterprises; (6) Song and dance halls, video halls, projection halls, karaoke halls, nightclubs, amusement halls, saunas, Internet cafes, bars, restaurants, teahouses and cafes with entertainment functions with a total construction area of over 500 square meters. Article 14: For a special construction project under any of the following circumstances, the construction unit shall apply to the fire control institution of the public security organ for fire control design review, and after the construction project is completed, apply to the fire control institution of the public security organ for fire control acceptance: (1) Construction projects in crowded places listed in Article 13 of these Provisions; (2) Office buildings, power dispatching buildings, telecommunication buildings, postal buildings, disaster prevention command and dispatching buildings, radio and television buildings and archives buildings of state organs; (three) other public buildings with a single building area of more than forty thousand square meters or a building height of more than fifty meters other than those specified in the first and second paragraphs of this article; (4) Urban rail transit, tunnel engineering, large-scale power generation and distribution engineering; (5) Factories, warehouses, special stations and docks for producing, storing and loading and unloading inflammable and explosive dangerous goods, filling stations, supply stations and pressure regulating stations for inflammable and explosive gases and liquids. According to this regulation, you should check whether you need to go to the window of the fire department of the district fire brigade to review the drawings of the construction project. If it is not necessary, it can be put on the website of Beijing Fire Bureau (www.bjxfj.gov.cn) for online filing, which may be subject to random examination or spot check. If you are selected, the materials you need to prepare are the same as those for the required items stipulated in the Ministry of Public Security 106 Order. If you need to prepare materials, please prepare according to the following requirements: 1. Two application forms for fire protection design audit of building projects, the cover of which is stamped with the official seal of the construction unit, and the name of the project is indicated on the first page of the form. Two, the construction unit's business license and other legal identity documents, stamped with the official seal of the construction unit; (Copy of business license with official seal) 3. Construction project planning permission documents for new and expanded projects; (If decoration works are not required) Fourth, the qualification certificate of the design unit is stamped with the official seal of the design unit; (Copy of business license with official seal) V. Power of attorney of the construction unit (with official seal of the construction unit) and a copy of the client's ID card. 6. Fire protection design document: 1, design specification: (A4 printed in white paper, each page stamped with the special seal for examination and approval by the design unit) 1) Cover: project name, design unit and design date; 2) Title page: the names of the legal representative, technical chief, project chief, decoration chief, electrical chief and fire chief of the design unit, which shall be signed or sealed by the above personnel; 3) Directory of design documents; 4) Design description: ① Engineering design basis. Including the main laws and regulations implemented in the design and the main standards adopted (including the name, serial number, year and version number of the standards), and the information provided by the construction unit on the use requirements or production technology. ② Construction scale and design scope. Including the project design scale and project composition, design scope and division of labor. (3) indicators such as the area of renovation or decoration design. ④ Main fire-fighting equipment, fire-fighting products, building components and building materials with fire-fighting performance requirements that have been set (or added) in the project. (5) Adopting new technologies, new materials, new equipment and new structures. ⑥ Fire protection design with special fire risk and problems that need to be solved or determined when design approval is needed. ⑦ Decoration major. Including the general situation of the original project use, classification and fire resistance rating, as well as the general situation of this project; The use function and technological requirements, functional zoning, plane layout and transformation of the original project of this project; The combustion performance grade of decoration materials used in various parts of decoration can be expressed in tabular form except for text description. 7. Design drawings: 1: 100 or 1: 150 blueprints are required to be stacked in A4 standard stacking mode and submitted to the archives. The drawings shall be stamped with the special seal for the annual drawings submitted by the design unit for examination and approval. Eight, the construction unit to prepare the construction organization design, stamped with the official seal of the construction unit nine, the construction unit to prepare fire safety measures, stamped with the official seal of the construction unit ten, the construction unit to prepare the construction site fire power system, stamped with the official seal of the construction unit eleven, the construction unit to prepare a copy of the fire safety agreement, signed and sealed by the construction unit, property unit and construction unit. The second procedure is to go to the urban construction archives to microfilm the drawings after getting the construction review opinions (you need to bring a full set of drawings and the original construction review opinions). The third procedure, after obtaining the construction review opinions, can carry out the "fire control audit on the construction site" at the same time as the drawings are miniaturized, which is usually called the fire control work permit. The preparation materials are as follows: 1. The construction unit shall fill in the Application Form for Fire Control Audit of Beijing Construction Project Construction Site. (in duplicate) 2. Relevant opinions on fire prevention audit of building fire protection design (copy). 3, fire safety measures and fire power system. 4. Fire safety agreement signed by both parties. 5, construction organization design scheme (in the form of construction site plan and text, indicate the fire lane and fire equipment). The fourth procedure: after the project is completely completed, it is necessary to find a company with fire detection qualification to pay the project construction cost (generally 1-3 yuan /m2). The detection is divided into two parts: 1, fire electrical detection (including lamps, switches, sockets, distribution boxes, etc.). ); 2, fire control facilities testing (including alarm system, sprinkler system, distribution box, etc. After passing the test, two kinds of test reports are issued, namely, the fire-fighting electrical test report and the fire-fighting facilities test report. The fifth procedure, fire acceptance application procedure, needs to be prepared according to the following materials: 1. Two copies of the declaration form for fire control acceptance of construction projects, with the cover of the audit form stamped with the official seal of the construction unit, and the name of the project indicated on the first page of the form. Second, the project completion acceptance report: stamped with the official seals of the construction unit, supervision unit, design unit, decoration construction unit and fire control construction unit; (Signature of project leaders of all units) III. Certificate of fire protection product quality; Four, in line with national standards or industry standards of building components, building materials, interior decoration materials, fire performance requirements, certification documents, factory certificate; Five, fire facilities, electrical fire prevention technology inspection documents; Six, construction, engineering supervision, testing units of the legal person identity certificate and qualification certificate, each stamped with the official seal of the unit; Seven, the construction unit power of attorney (stamped with the official seal of the construction unit) and a copy of the client's ID card; Eight, other materials that need to be provided according to law. Nine. Description of the use nature of the project: This description is provided by the construction unit, indicating the height, area, number of floors and the use nature of each floor, printed with A4 white paper and stamped with the official seal of the construction unit; X. On-site image data: Take photos of the construction situation of the acceptance project (that is, the hidden parts in the construction process), the completed fire lanes, evacuation instructions and diversion signs, evacuation passages, fire-fighting facilities, decoration and other important parts, which will be printed in A4 white paper color by the construction unit and stamped with the official seal of the construction unit. XI。 Copy of the audit opinion of the fire building of this project XII. The sixth procedure of drawing micro-receipt. After the fire-fighting acceptance formalities are completed and the fire-fighting acceptance is qualified, you will get the fire-fighting acceptance opinion of the construction project, and then you can go through the fire-fighting acceptance formalities before you can start business. I'm not sure about the details. Note: All the forms mentioned above can be downloaded and printed from official website, Beijing Fire Bureau. The above contents were collected by Heyuan Intelligent Bian Xiao.