First of all, one of the ways to fix the board on the wall is:
This method is relatively simple and can be directly made of wood core board. First, cut the wall with a cutting machine to a depth of about 5 cm, directly embed the cut board into the groove, fill it with white latex and gypsum, and fix it. But it should be noted that this method can only be used for decoration, not for bearing.
Second, the method of plate fixed on the wall 2:
The anchor bolt reinforcement method is to punch several holes in the board first, depending on the length of the board. This method should not be too long. Then, make several holes in the horizontal direction of the wall and nail 2 or 3 anchors. The hole spacing should be determined according to the hole spacing on the plate.
Drive the anchor bolt into the wall, the anchor bolt is about 10 cm, half of it is in the wall, half of it leaks out, and there is a hole in the board, so insert the anchor bolt. This method still has a certain bearing capacity.
Third, the method of fixing the plate on the wall 3:
This is a way to make the board have bearing capacity. Take the installation of 20mm cabinet board as an example, such as hand drill, electric hammer, cross screwdriver and hammer. You can decide how many expansion pipes to punch, usually one in each corner of four feet.
Drill a hole with a thickness of 10mm on the wall of the cabinet board every 20cm with a hand drill, and then put the board in the position you want to fix. The depth of the hole depends on the width of the board and the weight of the object placed on the cabinet board in the future, and is generally not less than 15 cm.
Then punch holes in the corresponding position on the wall with an impact drill, use inward expanding nails on the wall, and match the 10mm ceiling with trowel lacing. After the expansion nail is in place, align the hole of the cabinet board with the brace, and knock the cabinet board to the bottom with a rubber hammer. Scrape putty at the seams of the board and at the eyes where the board has just been fixed, then polish it with sandpaper and paste wallpaper.
Fourth, the fourth method of fixing the board on the wall:
This is a simple method, mainly used to install narrow wooden boards, and they are all ready-made objects, that is, nails. There are many specifications for nails, usually 3 cm. If the board is wide, you can also use longer nails, such as 6 cm nails. This nail is long and thick, so it is no problem to nail the board directly to the wall.