1. Install the underframe: Before installing the treadmill, install the underframe. Assemble the underframe and bracket respectively according to the instructions, and then one or two people will lift the underframe and place it in the center of the use site. Pay attention to balance the chassis in four directions with a level.
2. Installation of the column: put the two tubes of the column together and fix them with screws, then put them on the chassis, hang the plug and fix them on the chassis. Check the balance with a level again.
3. Install the handrail: Next, install the handrail of the mechanical treadmill. Assemble the handrail, and then fix the handrail to the column according to the instructions. After installation, shake the handrail vigorously to check whether the handrail is stable.
4. Installing the running belt: Before installing the running belt, insert the elastic adjuster into the armrest tube and fix the running belt on the treadmill. Then tighten the running belt by adjusting the lever to test whether it is normal.
5. Installation of protective cover and instrument: Install protective cover and instrument, then plug the power cord into the socket and connect the power supply for trial operation.
The above is the installation method of mechanical treadmill. It should be noted that during the installation process, you must read the instructions carefully and install according to the steps to ensure the safety and stability of the treadmill. If you are not sure, you'd better ask a professional to install it.