Now many families have balconies with clothes racks installed on them. Then we should have a certain understanding of the installation method of balcony drying racks, and then we can see how to install them together.

1. Prepare relevant installation parts.

The method mentioned here is the manual hanger installation method. The first thing we have to do is to remove it from the outer packaging, and then carefully check whether the parts inside are damaged. Generally, there are rings, hand cranks, handles and expansion screws. In general, there will be instructions attached to it. We can check which parts are on it and count them one by one.

2. Install the hand dryer.

We can install hand cranks at both ends of the corridor. Generally speaking, the distance from the ground is 1 m2. This height is more convenient to use. First mark the hole position of the fixing hole, then punch and install the expansion screw, and then fix the hand crank. But remember to shake off the wire rope inside the crank.

3. Install the roller frame of the clothes hanger.

This roller coaster needs to find four support points on the ceiling. Just like installing a hand crank, it is necessary to determine the installation position and mark it, then punch holes, and then assemble the four rollers and install them on the corresponding holes.

4. Install other parts and components

After installing the main body, install the corner device. Then, the last step is the installation of steel wire and lifting ring. During this process, all projects must be installed in place. After all these things are installed, check whether there are any omissions and whether they are firm. If there is no problem, you can use it.