As the name implies, the buried basketball stand is a basketball stand installed underground. Because the lower half of the basketball stand is buried and fixed underground, it is called buried basketball stand. Buried basketball stand is a kind of basketball stand widely used outdoors, which embeds a part of the basketball stand into the ground to realize the fixation and use of the basketball stand. Buried basketball stands are very common, and many outdoor fitness equipment use them. This kind of basketball stand is firm, easy to install and has no problem. Of course, it needs professionals to install it. The price of buried basketball stands is around several thousand yuan, which is divided into medium, high and low grades. Just choose what suits you. There are two kinds of buried basketball stands, one is buried fixed basketball stand, and the other is buried round tube basketball stand. The installation of the fixed basketball stand can be summarized into three steps. 1. Point selection: according to the arm span of the basketball stand, select the fixed position of the basketball stand; Secondly, the size of the embedded hole of the basketball stand is determined by the arm distance between the embedded part and the basketball stand; Third, install the basketball stand, and then install the basketball stand after the embedded parts are completely dried. Installation method:

Selection point of fixed basketball stand installation: The arm distance of fixed basketball stand has several common specifications, such as 1600mm, 1800mm, 2250mm, etc. And the position of the basketball stand is fixed according to the rules of the basketball game. For example, the wingspan of the basketball stand is 1600mm, so the fixed point of the basketball stand is1600-1200-50 mm = 350mm, that is, 350 mm outside the end line is the fixed center point of the basketball stand. Pre-embedding of the fixed basketball stand: determine the size of the pre-embedded hole of the basketball stand according to the pre-embedded parts of the basketball stand. Generally, the embedded parts of basketball stands are 35*35*40cm iron brackets, so the size of the embedded holes is preferably 50*50*50cm square holes, so that the basketball stands can be fully stressed. The embedded parts are made of sand, cement and stone, and the embedded parts of the basketball stand are exposed with 2-3 cm long screw columns for fixing the base of the basketball stand. Installation of fixed basketball stand: the installation of basketball stand can only be carried out after the embedded parts are completely dried, and the general time is 3-5 days. When installing, the level of the basketball stand must be fixed, because the installation ground is not necessarily flat, which may cause the basketball stand to tilt. Therefore, a level test is carried out around the tube wall of the basketball stand with a level meter to ensure the balance of the basketball stand.