A common problem in the use of treadmills is belt slippage. When the belt of the treadmill slips, it is likely to affect the fitness effect of users and even damage the equipment of the treadmill. So, when the belt of the treadmill slips, how should it be repaired?

First of all, we need to find out the reason why the treadmill belt slips. There are many reasons for belt slippage, which may be due to insufficient friction between belt and roller, or belt relaxation or aging. According to different reasons, corresponding repair methods need to be taken.

1. Adjust the friction between the roller and the belt.

First, check whether the friction between the roller and the belt is enough. If the friction force is insufficient, the friction force between the belt and the roller can be increased by adjusting the fastening rod.

2. Adjust the tension of the belt

If the belt is too loose, it will also cause the problem of belt slipping. At this time, it is necessary to adjust the tension of the belt so that it can be closely attached to the drum without excessive tension.

Replace belt

If the above two methods can't solve the problem of belt slipping, it may be necessary to replace the belt. Treadmill belts generally need to be replaced regularly. If it is used for a long time, you can consider replacing it with a new belt.

In short, the maintenance problem of treadmill belt slippage should be decided according to the specific situation. You can try it according to the above method. If the problem cannot be solved, you can ask a professional to repair it. At the same time, in daily use, we should also pay attention to the maintenance of the treadmill, so as to better maintain the performance and life of the equipment.