Many owners who have experienced renovation for the first time will ask me, where should I spend my money most?

My answer is:?

1, spent on personal preferences. If you like cooking, you will spend a lot of money to build a kitchen, if you like listening to music, you will install a high-grade stereo, and if you like fitness, you will open a gym …

2. Whole house customization. I'll talk about it in detail later.

3. Home appliances. With the rapid development of science and technology, the upgrading of household appliances can directly improve the quality of life. From home theaters, smart housekeepers to electric curtains, that is, hot water dispensers and smart password locks ... whether it is expensive or cheap, it is worthwhile to make life better. ?

General decoration, when it comes to cabinets, the common schemes are as follows.

1, buy finished products.

Advantages of buying finished products: rich in shape and cheap in price?

Disadvantages of buying finished products: the size is fixed and does not match the size of the house.

The carpenter built it on the spot.

Advantages of carpenter's on-site construction: suitable size and cheap plate?

Master Mu made shortcomings on the spot: rough edges and corners, poor sense of design and long construction period?

3. Whole house customization. ?

Advantages of whole house customization: rich modeling, fit size and strong adaptability?

Disadvantages of whole house customization: beautiful ones are expensive, ugly ones may be expensive, and the water is too deep.

How to choose the whole house customization? ?

There are a lot of house customization in the market. Personally, I suggest not to go in like me X, Sophie X, Europe X and wisdom X, which is expensive, poor and ugly. It is simply that those stores want to insert their eyes when they see the case, and the after-sales quality is also worrying. ?

No matter what materials are selected, quality, price and environmental protection are the most concerned points. The whole house is relatively customized, and there are so many directly exposed plates. ?

Nowadays, custom-made wardrobes and cabinets often use artificial plates, which must be shaped without glue.

In the era of particleboard fever, the main source of formaldehyde is the glue used for synthetic particleboard, which is scientifically called urea-formaldehyde resin glue. Because of its high formaldehyde content and low cost, it has always been favored by manufacturers. ?

For consumers, it is impossible to judge what kind of glue the material is commercially used in a short time by naked eyes. It is obviously not enough to judge whether there is a pungent smell. After all, you can't know how long the samples displayed by the material supplier have been kept. So it still depends on the relevant endorsement. ?

There are many environmental protection standards in the market, such as national standard E0, European standard E 1, Japan F4 Star, formaldehyde-free board, eco-board and so on. Europe, America and Japan have a set of formaldehyde standards, the difference is that the detection methods are different, so these standards cannot be compared horizontally.

E0 and E 1 do not mean that 1 is better than 0. The original E0 grade (≤0.5mg/L) was determined by dryer method, and the new national standard was changed to 1m? Climate box method. ?

Japan's formaldehyde detection standard-F4 Star F4 Star Standard is actually Japan's "F☆☆☆ Certification Standard". It is a certificate issued by the Ministry of Land, Infrastructure, Transport and Tourism of Japan. F4 Star is the highest health grade in Japan and is considered as the healthiest environmental protection standard in the world. Products that can obtain F4 Star certification are usually sold to or imported from Japan, which is very rare in China. ?

Among the floors, I personally prefer Japanese floors because of their high environmental protection coefficient and high cost performance. ?

Wood-based panels certified by CARB P2 and P 1 are relatively affordable. Manufacturers use adhesives containing formaldehyde, but the formaldehyde content can be reduced by technical means, so that more people can afford it. ?

CARB P 1 and P2 have the same formaldehyde emission (≤0.05ppm), but the detection standard of P2 is stricter. ?

National standard E 1 class (≤0. 124mg/m? ) It is safe enough and easy to buy. ?

Eurostandard, F4 Star of Japan and CARB of California all put forward many strict production and quality control requirements for the factory, and the upgrade cost of the factory is extremely high. Generally speaking, only export manufacturers will have the European standard E 1, F4 star carbohydrates in Japan and California.

After popularizing these concepts, it is said that quality depends on the variety of wood and environmental protection depends on the relevant endorsement.

At present, the most environmentally friendly and cost-effective board is Aige board, which is manufactured by FRITZ EGGER GMBH Co, Aige Group of Austria. The environmental protection level reaches European E 1, and the English abbreviation is MFC. The substrate of Aiban is covered with a specially impregnated surface layer, which is scratch-resistant and acid-and-alkali-resistant, and is not easy to fake. There is also a specific LOGO on the back, so you can know whether it is MFC at a glance. ?

After the quality pass, the next step is design and technology.

There are many kinds of whole house customization in the market. ?

I really want to hit someone ...?

Excellent whole house customization requires research on materials, technology and proportion ... at least aesthetic. ?

But many of them don't know. I feel powerless when I see such a picture (the drawing is the structure of the first picture).

Let's see something nice to wash our eyes. ?

No matter from the scale, indomitable spirit (there is no adjustment board, and the construction requirements are also very high), the collocation of different materials, the matching of colors, and the interface technology, God is in the details. The most direct way to choose the whole house is to look at the shape of the store, the door closing, the brand of hardware, the installation method of the light strip, whether the sliding door has shock absorption and the back of the board. ...

Good or bad, I know.

If you don't have a POLIFORM (too expensive) or BOLONI (bad) budget, you can take a walk first and see what it looks like, and then find one that meets your budget. Some niche brands or factories that make the whole house can reach similar standards.

Look at the drawings of the whole house, and then look at the completion site of the whole house, and make a comparison between the two.

Look at the details I said above. Shut up and serve.

As for the brand or which? ...

I don't make recommendations. Everything has its own price, and everyone's needs are unclear and they don't know what to recommend.

And I only know a part of so many whole house brands, so I won't talk nonsense if I don't know.

Just choose one that suits your home.

This answer comes from our design, more decoration strategies and home experience. Welcome to the live APP.