1, let's hook the top of the hat first. Loop 1: loop upward, tick 7 short stitches in the loop and draw with 1 stitch (do this for each subsequent loop); The second lap: the hook in each stitch is short by 2, and one stitch is * * *14; The third lap: every 1 needle plus 1 needle, according to the rule of 2 1, one ***2 1 needle; The fourth lap: add 1 stitch every 2 stitches, and according to the law of 1, 1, 2, one ***28 stitches.

2. In the 1 needle, the hook is short 1, and in the second needle, the hook is short by 2. Then add 1 needle repeatedly every 3 stitches. According to the law of 1, 1, 2, the last 2 stitches are short (in fact, this cycle is to add 65438+ cycle 6 every 3 stitches: add 1 needle every 4 stitches, and one * * is 42 stitches; The seventh lap: short needle without or without hook; The eighth lap: add 1 stitch every 5 stitches, one ***49 stitches; Ninth circle: add 1 needle for every 6 needles, one ***56 needles; 10 turn: short needle without or without hook; 1 1 stitch: add 1 stitch every 7 stitches,1* * 63 stitches (if it is small or large, you can change the number of stitches according to the law).

Let's catch the hat then. Turn to 1: Lock 3, thread the long needle of 1 on the right, and then repeat the crossing of the long needle of 1 on the right (that is, hook the long needle on the left first, then hook it on the long needle of 1 on the right), and finally hook it on the 1 group. The length of this section is about 8- 10 cm.

Then let's hook the brim. Coil 1: there are no short stitches in front, and finally 1 needle hook has 2 short stitches, 1 root ***64 stitches; The second lap: every 1 needle plus 1 needle, according to the rule of 2 1, one ***96 needles; The third circle: repeat the hook method of cap body 1 circle, and * * * tick out 48 groups of cross needles; Turn 4-5: no hook-reducing short needle; The sixth lap: add 1 stitch every two stitches, and according to the law of 1, 1, 2, one *** 128 stitches; Turn 7: Tick off 64 sets of cross stitch; This section is about 7-8 cm long.

5. The eighth lap: wrap the plastic strip to hook it, and do not add or subtract the hook short needle. When there is a small piece left, we should sort out the plastic strip, adjust the shape of the hat, let it expose a small piece of plastic strip at both ends, cut off the redundant part, and wrap the two ends around each other to fix it, and then we will continue to hook the remaining part with short needles. After this lap, our summer hollow sunshade straw hat is completed, which is both fairy and beautiful with a dress!