Jianyi treadmill is a common fitness equipment, and its handrails are very important for runners, because it can provide extra support and balance and reduce the risk of falling while running. However, sometimes the handrails may be damaged, which may affect the use of the treadmill. Next, let's discuss the possible causes and solutions of the handrail failure of Jianyi treadmill.

First of all, the handrail failure of Jianyi treadmill may be caused by unstable installation or poor locking of the handrail. At this point, we need to check whether the joint of the handrail is loose, and adjust or replace the handrail mounting parts appropriately.

Secondly, the failure of handrails may also be related to circuit problems. If the circuit of the treadmill fails or the power plug is loose, the handrail may not work properly. In this case, we need to check whether the wires and plugs of the treadmill are fastened and reset the circuit switch.

In addition, the failure of the handrail of Jianyi treadmill may be caused by the damage of the handrail sensor. The armrest sensor can detect the heart rate and other related indicators of the runner, but if it is damaged, it may cause the armrest to fail to work normally. In this case, we need to replace the armrest sensor.

In a word, the reasons for the failure of the handrail of Jianyi treadmill are different, so it needs to be checked and repaired according to the specific situation. In order to ensure the safety and durability of the treadmill, it is recommended to maintain the treadmill regularly to avoid failure and damage.