How to fasten the double-loop buckle canvas belt? I believe everyone is familiar with belts. Belts can be used to fix the two ends of our trousers, and the fixing methods of belts are also very diverse. Next, I'll show you how to tie the double-loop buckle canvas belt.

How to fasten the double-loop buckle canvas belt? 1 The double-ring buckle belt will pass through two rings at the same time, and the double-ring buckle will be opened and fastened.

1, the double-ring buckle has two rings, one is long and the other is short, and the two rings pass through at the same time.

2. Open the double-ring buckle and bypass the short ring.

3. Come back from the long ring, slightly open the small ring with one hand, and then pull the belt.

If the belt is fastened, just pull it.

Precautions:

1, double-loop buckle the small loop of the belt, and then pull the belt. If it is tight, pull the belt like that.

2. Pair it with jeans and slacks.

How to fasten the double-loop buckle canvas belt II. Straighten the belt first, and pass through the belt with a small buckle outside and a large buckle inside.

Pass one end of the belt through two buttons.

Pull back one end and let the lead pass between the two buttons.

Is it simple to close the belt tightly and let the long end pass through the other end of the trousers, thus tying a belt?

How to fasten canvas belt with double rings? How to tie a belt with only two rings?

1. First, pass the belt through two rings, as shown in the figure below.

2. Then, bend one end of the belt as shown in the figure below.

3, and then through the second ring hole, as shown in the figure below.

4. After passing through the second lap, pull the belt hard, as shown in the figure below.

5. That's it. See the effect, as shown in the figure below.