The fishing principle and bottom finding method of luminous float and ordinary float are basically the same. The difference between luminous float and ordinary float lies in the difference of tail length and tail diameter. Three principles to be mastered in correctly adjusting electronic drift.

The introduction of electron drift is as follows:

The electronic luminous float relies on the battery to supply power to the luminous element. Before use, batteries (generally CR3 16 and CR425) need to be assembled on the floating body. The specific steps are as follows: unscrew the float body of the electronic luminous float, and then put the float body into the battery and tighten it. At this time, the electronic luminous float will glow, and finally the electronic luminous float can be connected to the float seat of the line group for fishing.

Electroluminescent tail electron drift: Electroluminescent tail electron drift is a common electron drift. The characteristic of this electron drift is that the light is not dazzling and eye-catching, and the drift phase can be identified no matter how far or near.

High-brightness tail electron drift: high-brightness tail electron drift is a common electronic drift, which is characterized by very high gloss, but the disadvantage is that it is very easy to stare at the fish drift for a long time.

As follows:

Due to the different lengths of each part, there are eight kinds of electronic drift, such as long-leg long tail drift, long-leg short tail drift and short-leg short tail drift. Different types of drift have different grams, so it is impossible to accurately describe whether it comes from drift body or drift tail.

Different electronic drifters may have different fish and water conditions, so it is impossible to accurately judge where grams come from. Electronic floats are mostly used for night fishing, and batteries are installed in the floats. The floating tail will glow, so that you can see the floating phase at night. Adjust on the basis of ordinary floating. A luminous tube is installed inside the floating tail to keep the floating body hollow, and a battery is installed to make the floating tail glow, which is a special float at night.

Fading tail electron drift is a common electron drift. The biggest feature of this kind of electronic drift is gravity sensing equipment, and the color of the drift tail will change when the fish bites the hook. The shadowless electron drift in water is a common electron drift, which weakens the return light in water according to ways and methods, and then makes the light not reflect in water.