Instructions for use:
1. Turn on the power: Press the ON key, the LCD screen will open, and the massage mode indicator arrow will point to the acupuncture mode. At this time, the intensity is 0, and the timing is 15 minutes.
2. Select Chinese and English display: Press the Chinese and English display key, and the display screen can be converted to Chinese or English.
3. Select massage mode: press the function selection key to select acupuncture/thumping/massage/cupping/massage/scrapping/slimming/immunomodulation in turn.
4. Adjust the strength: press the strength adjustment key to adjust to the appropriate strength.
5. Timing selection: you can select minutes, and each time you press it, it will increase by 5 minutes.
Precautions:
(1) electrode shall be used at the same time, and the protective film shall be torn off before use. Remember that two electrodes should not touch each other with electrodes to avoid short circuit after adhesion.
(2) Electrode pads made of silica gel will age, so make sure the skin is clean and sweat-wiped before each use. After use, stick a protective film in time, do not get dirty, and stay away from direct sunlight and damp places to prevent aging and prolong service life.
(3) During the treatment, some people feel that the dual-function therapeutic head is strong or weak, which is caused by different nerve distribution and skin sensitivity in different parts of the human body, or insufficient contact between the patient's skin and the dual-function therapeutic head. Then wipe the neck skin with a warm and wet towel 1 ~ 2 minutes before treatment, and treat it when it is just about to dry, so as to ensure that the neck skin is in full contact with the dual-function treatment head (if the neck skin is damaged, use it after the skin is completely healed).
(4) There is no power output after the dual-function therapeutic head is electrified: check whether the time and intensity on the control panel are set (the instrument will start working only after the time and intensity are set); If there is still no output after setting, it depends on whether the system is plugged into the host, and it is necessary to connect the patch panel and wires. There is no output after plugging in the system, which belongs to the internal fault of the host and should be returned to the factory for maintenance.
Well, that's enough about the use and precautions of digital meridian physiotherapy instrument. If you are planning to buy a digital meridian physiotherapy instrument, please read this article first, so that you can have a good idea when using it in the future. Digital meridian physiotherapy instrument is the latest generation of health care products, which can not only massage, scrape, cupping, massage and other health care, but also regulate human immune function, greatly improve the overall treatment effect and make patients get rid of physical discomfort as soon as possible.