1. The treadmill cannot be turned on.
Check whether the power socket is plugged in, check whether the power cord is damaged, and then check whether the switch is turned off. If there is no problem with the above, it may be because the power-off protection function triggers that the treadmill cannot be turned on. At this point, check whether the elastic band is installed correctly, and then try to turn on the switch again.
2. The treadmill flashes.
The splash screen is mainly caused by the failure of the control panel. Try restarting the treadmill or upgrading the control panel with online upgrading software provided by the government, and check whether the connecting cable of the control panel is loose or damaged.
3. Treadmill pulley wear
If the pulley of the treadmill is seriously worn, it will lead to increased noise and make the treadmill uncomfortable to use. This problem requires replacing the pulley.
4. Load wheel failure
If the load wheel of the treadmill fails, the treadmill will not run smoothly or even stop running. This problem usually requires replacing the load wheel.
5. Anti-swing pad wear
Wear of the anti-swing pad will lead to instability of the treadmill. This problem only needs to replace the anti-swing pad.
Be careful when repairing Xiao Qiao's treadmill. If you are not familiar with the operation of the treadmill, you'd better ask professional technicians to repair it. At the same time, we should also pay attention to the steps in the instructions every time we exercise, so as to ensure the normal use of the treadmill and reduce the occurrence of faults.