1.

Reducing the fishing height is called slow fishing, because it means that when the fishing mark is lower than the fishing mark, the length of the waterline exceeds the water depth. Because the main line is in a straight line under the action of two opposite forces, the falling force of the falling object and the buoyancy of the buoy, the extension of the waterline will shorten the distance between the lead pendant and the bottom of the water, so a curved or even straight subline appears. On the contrary, the lower the fishing eye is, the shorter the waterline is, and the short sub-line becomes straight under the traction of the buoy. Therefore, it can be understood that slow fishing is the bending of two sub-lines, sensitive fishing is the bending of the long line, and the short line is basically straight. However, the existence of running water actually changes the line group reflected by fishing eyes. First of all, the running water changes the linear relationship between the buoy and the sinker, and the traction of the buoy is weakened; Secondly, the current washes the main line into a curved arc, and the resulting waterline extension no longer represents the actual water depth; Moreover, it seems that the sinker moves synchronously. In fact, it is the buoy that drags the lead away, and both sub-lines are inclined. In the face of running water, there are three measures to slow down fishing: (1) Choose the corresponding buoy according to the current speed. If it was originally No.3, use No.5 or No.6, the falling weight will increase accordingly, and the curvature of the main line will be improved. (2) After changing the fishing height and lowering the fishing height, it is still impossible to stop the buoy from running. You can drag the two hooks to the end by extending the auxiliary line. (3) Setting a secondary pendant with lead weight equivalent to 1 mesh or 2 mesh buoyancy on the short sub-line, resulting in two hooks dragging the bottom.

2. Replace the big label with the small label and grab the lead.

When the fishing group is buoy No.3, fishing No.4 and fishing No.2, and the pipe lead base is adopted, buoy No.2 or 1 is used for flowing water. If a buoy with a smaller number is regarded as an increase in falling weight, the original adjustment of 4 meshes may be to adjust 2 meshes or level water, and fishing 2 meshes will be very slow, and two hooks will drag the bottom. Why can only tubular lead leather seats do this? In order to overcome the running water and not bring difficulties for small fish to drag the lead pendant, the bottom pendant fishing group designed a heart-piercing pendant, which is characterized in that the main line passes through the pendant hole, the fish bites the hook without affecting the lead pendant, and the lead is fished out from the pendant. Buoy buoyancy is small, the ability to balance the falling weight is reduced, and the lead pendant must run down. This causes the lead to fall from a higher position to a position close to the bottom, resulting in bending of the sub-line. However, most buoys need fishermen's careful feeling over time to determine their range of change, except that the accurately set buoys have a figure equivalent to the change of buoyancy of two eyes in specifications. For fishermen who lack accumulation or have only a few non-sequential buoys, lead fishing is not desirable. Even if the tubular lead base that absorbs the heart-to-heart falling characteristics touches the bottom and lies down, the biting signal of the fishing line can still be obtained. Hanging a falling body to the end is one of the common skills in the competition. It is very useful to catch a fish that has been caught many times but is careful in biting the hook. Running water is similar to the heart drop of a bottom drop fishing group.

3. Slimming long label and fishing flat.

The speed of water is unbalanced. From the bottom to the surface, the underflow is large and the surface flow is small. Sometimes it seems that the buoy runs fast and pulls the waterline obliquely, but it is actually blown by the wind. In another case, the wind blows here and the water flows there. In either case, the first thing to bear is the body of the buoy. Seen from the horizontal direction, the marker is thick, the contact surface is large, and the buoy moves fast; The standard body is thin, the contact surface is small and the buoy moves slowly. From the vertical direction, trees attract wind. The thicker the marker tip, the higher the part exposed to the water, and the faster the buoy moves. Therefore, the thinner the marker tip, the lower the fisheye, which can reduce the influence of wind. However, the change of water flow also includes sudden turbulence, that is, there are fast and slow, up and down irregular water flows. Therefore, the thinness of the standard body should be combined with the extension of the standard tip to have a positive effect of resisting surface flow and turbulence. For example, "Falling on the Moon" was originally designed for pond fishing. After changing the hollow tip with a length of 7 steps into a solid tip with a length of 2 1cm, and changing the material and shape of the tip, it was recognized as a short spindle. In Shanghai, it was called a wild river, and sometimes it ran in streams. The influence of wind on surface current is mainly at noon. When the wind is strong and the surface current accelerates, the fishing eyes should be adjusted in time, such as adjusting 5 fishing and 3 fishing in the morning; After 9 o'clock, it will be changed to fishing 2 orders; Catch 1 mesh or level water at noon. Sometimes the fish mouth becomes smaller and lighter at noon, and the long-pointed buoy can be slimmed down to minimize the residual buoyancy. At this time, adjusting the half-eye fishing position can not only slow down the influence of running water, but also improve the rate of catching fish.

4. Walk for a while and catch obstacles.

Many responses of buoys to flowing water are false and exaggerated, because the wind makes the buoy move, and the surface flow is fast and the bottom flow is slow. This is based on a phenomenon: when the hook is thrown, the buoy drifts with the wind when it is in place, but after walking 80 cm, the target tip of fishing target 3 is not bitten by fish, but gradually becomes 1, so the target stops. 1 minute or 2 minutes later, a message of a fish appeared on the tip of the standard. The fish was caught by the pole, but it came out of the buoy not far from the original fishing point. The explanation for this phenomenon is that there are obstacles or pits at the bottom of the water. After the hook is brought here by running water, the sub-line is caught by obstacles or trapped in the pit. So the hook doesn't go, but it goes with the mark. If the line is tilted, the fish will stay away from the buoy. On the other hand, after a certain distance, the buoy is blocked by reeds or other things sticking out of the water. Once the marker stops, the hook will not go. Although the waterline is a little curved, it has little effect on fish information, especially on the improvement of markers. This fishing method, which uses obstacles at the bottom of the water and the surface of the water to keep the hook, is suitable for shallow water with a water depth of 1.5 meters, and will show its talents in flood season because the shoal is flooded. If you choose fishing spots near reeds, you will often get unexpected gains. There are two obstacles to fishing in water. First, you can't stop walking, and the buoy displacement can't exceed 1 m; Second, avoid semi-sinking and semi-floating drift. Don't choose a fishing position with a straight shore and a narrow mouth. It is best to choose the position 5 ~ 10 meters inward from the water inlet.

5. Run the lead fishing method. Add lead until you are lying on the bottom, and move the space bean on the top of the lead near the buoy, so that when the fish eats the hook, the line can pass through the lead pendant and the buoy will reflect.