Remind the new engine oil: if you want to brush the machine, read more posts, especially the essence posts and tutorials in the forum. Don't brush the machine rashly, it's dangerous! But don't be afraid to listen to me. In fact, it is very simple to brush a computer, just like using a computer. It was difficult at first, but it was too simple for you to understand. So first of all, you should enrich your knowledge! ! !
Purpose of the course: In order to facilitate the novice, let the novice brush the mobile phone smoothly, avoid the economic loss caused by brushing the mobile phone, and improve the knowledge of mobile phone (v3\v3i\v3ie) faster.
Suggest new engine oil: read more posts in the forum and ask if you really don't understand. The friends in the forum are very enthusiastic, but they are opposed to asking questions without reading any posts. Others don't even read the hard-written posts. It's embarrassing to ask some simple questions, and it's also disrespectful to others!
Brush ultra-detailed tutorial:
One: First of all, you should know all kinds of information about mobile phones. The most important information you need to know is
1: Brand (such as Motorola) and model (such as v3i) must correspond. Look at the phone or phone box, or ask someone else (this is not nonsense! For beginners, they don't know much about mobile phones. What I want to say is that not all tools and resources are universal! Please take your seats accordingly)
2. Software version (such as R479_G_08). B4.38R) is the version of the system installed in your mobile phone. Look it up in your phone, menu-Settings-Phone Status-Other Information-Software Version.
3: The boot version (such as 0A.30) is the version of the hardware installed in your mobile phone. Look it up in your mobile phone. Turn it off first, press *+# to enter dos mode, and you will see it ~ I don't know how to quit dos after reading it? Press on/key ~ and it will be turned on.
Two: you have to understand that not all software versions and boot versions can brush each other! Software versions are allowed to brush each other, depending on whether the version of BOOT is allowed or not, and vice versa. Be sure to brush the machine according to the information of the mobile phone! ! ! If you think this is too limited, you can downgrade the version (that is, downgrade your version through tools). The degraded version here includes two aspects, namely, software version degradation and boot version degradation (the post on the degradation method in the forum needs to see if you want to downgrade). Knowing the version knowledge will greatly improve the success rate of the brush ~ the brush version corresponding to each version.
Suggestion: Select the brush package according to the boot version first, and then consider the mobile phone software version.
Three: To ensure that your mobile phone can be connected to the computer normally, you need two things to connect the computer, the data cable and the driver. If there is no driver, you can download it in the forum. A few dollars for a data cable.
Four: Now you have a basic understanding of your mobile phone, but there is no software to brush. The software you need to prepare is 1: Motorola RSD Lite (RSD for short), which is the software that brushes it 2: Flash &; Backup (FB for short) is to use this software to back up the original files (software system) on your machine. There are too many software forums, so don't worry about downloading these softwares.
Five: You still need one thing! Brush the bag directly (*. Shx)~ Go to the forum to find your favorite bag ~ (or the corresponding version of that sentence) Now many people on the forum are brushing the godfather's bag. I want to remind newcomers that it is best to downgrade their own software version before brushing the godfather's bag.
Suggestion: Select the brush package according to the boot version first, and then consider the mobile phone software version.
Everything is ready now, but don't brush it in a hurry. You are doing the simplest and most important thing now, charging! Be sure to fill in some before brushing, so as not to die in the middle of brushing, which will make it impossible to brush. Usually, such a fault will cause the mobile phone to stay in DOS mode, but DOS mode cannot be charged. You have to use a universal charger or a travel charger to pull out the battery, which is very troublesome, and it may also cause the phone to crash because of this brush crash! The consequences are serious, but not in most cases. The computer can be repainted after charging. Charging tutorial (figure it out for yourself ...)
Seven: What else is missing? It's gone In addition, unless you adjust your mentality, don't touch the data cable because you are too nervous ... I haven't heard of it ~ But remind the new engine oil not to unplug the data cable in the middle (don't doubt that it is not plugged in, believe in yourself), because there will be unexpected surprises, and each situation is different, which is difficult to handle, and the worst result: explosion! Most brush failures are caused by improper use. There are many such examples in the forum. As long as the method is correct, it will be successful, so don't be nervous ~ relax ~
Eight: Everyone is in a hurry. Now get to the point and start brushing! I'm afraid the new engine oil will make a mess. I'll make a few simple and easy to learn.
1: Connect the computer
Before connecting with the computer, you should set up some mobile phones, menu-connection -usb connection, and set them as data \ fax connection, and then connect the mobile phones with the computer, of course, through the data cable. If you install the driver, the computer will ring a few times. Check the device manager of the computer, and you will see that the mobile phone device is connected. If the driver is not installed, please install it. Some computers have their own drivers. If not, please download the driver and install it. )
2. Back up the data in the mobile phone.
After the mobile phone is normally connected to the computer, open the FB software until the software detects the mobile phone.
The original backup file is saved as a brush package (*. Shx), so be sure to save it, because the original is definitely the best match with the mobile phone. No matter what the phone is like in the future, it's a big deal to brush it back ~
3: brush the machine!
After backing up the file, close FB, open RSD software, and wait for the software to detect that the mobile phone starts to work.
Wait until 100%, and the automatic mobile phone will restart. Wait until the result shows that PASS proves that the brushing is complete, close the software and unplug the data cable (some mobile phones need to safely delete the hardware, mine doesn't, in short, it will be safely deleted).
Nine: Frequently Asked Questions about Brush Machine
* The mobile phone can't enter the DOS brush machine, so the solution * adds # and turns on the key to enter the brush machine.
* After the phone is swiped, the phone is restarted, but the result is not always displayed as passed. You can turn it off and enter DOS, and it will pass soon ~ then exit DOS and turn it on again.
* If you can't restart at the completion stage, or safely delete the hardware, unplug the USB cable and start the machine.
If you follow the above, there should be no other problems. If so, post on the forum, ask more experienced people, there will be many people to help you solve it ~
You're done! If you don't like the panel inside, download your favorite panel installation, as well as battery pack, on-off sound, off-screen screen and so on. , you can change it yourself, DIY personalized mobile phone!
Download address of related software:/thread-1285294-1-1.html.
The detailed solution to the whole process of V3 brushing machine (with attached drawings) is absolutely clear after reading it.
Friendly Reminder
* Brush machine has certain risks, please think twice before you do it, please read more materials and do it under the guidance of prawns.
* Please select a time when there will be no power failure.
* Make sure the phone is fully charged.
* Brush the computer when it closes unnecessary programs.
* After swiping your phone card, your original information in V3 will be completely emptied. Please prepare your ringtone picture and transfer the number from V3 to the mobile phone card.
[The general process for [R374] is as follows.
Answer: Upgrade the boot to 08.26 first.
B: Upgrade V3 to 42. 10 (by this step, the brushing work has been completed, and now you are the official version of 42. 10, which can be used normally).
C: Finally, restore backup subcontracting (step C is optional, and it is recommended that someone with certain computer operation ability do it. If you think the official version is not perfect, you can consider using it as a backup package.
[Detail] 1. Upgrade boot (with photos)
At present, there are two different versions of V3 motherboard, and the software and hardware are very different, so you can't mix them! Otherwise, it may lead to boot failure or other problems!
V3 press *#9999# to see what version you are (if you can't see it, please go to V3 DOS to see it). There are two motherboard versions, starting with R374 and R45 15 respectively!
The accessory numbers of these two motherboards are SLG463 1MA and SLG5007AA respectively.
The software version used by SLG463 1MA is R374_G_0E. XX.XX (only those starting with R374 can brush 42. 10).
The software version used by SLG5007AA is R45 15_G_08. XX.XX (as long as it starts with R45 15, this is a mobile customized version of V3, and 42. 10 cannot be brushed).
Under the condition that you start with R374, no matter what version of your original V3 is, V3 can be directly brushed as 42. 10.
No matter what version your original boot is, you can directly brush it as 08.26 at the beginning of R374.
Press V3 * # and the power-on key at the same time to enter V3 DOS in the power-off state. Here you can see what version of your boots are.
Boot is 08.23 and 08.26, and you can brush the latest version v3,42 42. 10/0!
If the boot is 07. D0 and 08. 10 Please upgrade and boot first! Brush the latest version V3, 42. 10, otherwise there may be white screen, flower screen, or keyboard failure.
The process of upgrading a lower version of boot to a higher version of 0826.
boot07D0 - boot0823 - boot0826
EXIF version: camera brand: camera model: shooting date:
EXIF version: camera brand: camera model: shooting date:
2. Brush process (graphics)
Sometimes smartmtoto can't find V3 or prompts V3 to be write-protected. Please insert the data cable several times to search for V3.
Turn on SmartMoto and connect V3 (on). If V3 is searched, it will automatically enter DOS.
EXIF version: camera brand: camera model: shooting date:
EXIF version: camera brand: camera model: shooting date:
After brushing, your V3 is now the official version of 42. 10MOTO, but it doesn't turn on some special functions (such as no camera, turning on the Bluetooth light as light, etc.). ).
At this point, the brushing process is over, and you are now the official version of 42. 10, which can be used normally!
3. Backup steps
Step c is a step of choice! Recommend someone with certain computer operation ability to do this step! If you don't even understand the concept of path, then don't do it, so you save a trouble.
A completely step-by-step performance
The software mobile phone motokit can only resume the backup process when it is turned on normally.
1: Confirm your version of V3. After V3 entered *#9999#, the software version was 42. 10R.
2. To start Motokit, use the latest version of 1.06 to connect the mobile phone, and use Motokit to delete all files in the phone's V3 directory, yes, all files! ! ! Nobody! Folders can't be deleted. All you have to do is go into each folder and delete the files inside. Remember which folder you deleted, because Motokit will think you didn't delete it, so you will still display those files. If you delete it again, you will be prompted that deletion failed! Because Motokit can't respond whether to delete files such as directories, please exit Motokit and re-enter. Don't unplug the data cable, repeat it several times until Motokit connects to the mobile phone and the mobile phone file is displayed as 0, which means it has been deleted. At this point, click Explorer on Motokit, and an error prompt should pop up.
3. Please unpack the 42. 10 slimming+full-function open backup package before recovery. The unpacked folder name is 2006-02-13110047. Then copy the whole folder to the backup directory under your computer's Motokit directory, then enter this backup directory, find the backup.xml file, open it with notepad, and modify the path of the second line to your computer's Motokit directory.
(back.xml defaults to d: SoftwareMotoKitBackup 2006-02-13110047.
For example, if you put your Motokit on the E drive, you should change it to E: Motokit Backup 2006-02-13110047) Other symbols cannot be changed! Save after modification, this step must be done! Otherwise, you will be prompted that the file cannot be found! Someone asked why they couldn't find the document, so they didn't answer. )
4. Now use Motokit to restore this backup, click Restore, then enter the backup under Motokit, then enter the backup directory, click back.xml, and click Next until the recovery is completed! This process takes about 5 minutes, maybe longer, with a progress bar and completion status.
5: After completion, turn off Motokit and restart the phone. At this point, the update is complete! All functions are on, with on/off screen and ringtone. Then, you can set up your phone slowly.
EXIF version: camera brand: camera model: shooting date:
Function and usage of 30
This backup is only optimized for 42. 10, and other versions cannot copy this package.
1. Rhythm light has been modified (in Settings-Personalization-Rhythm light, the function is to control the flashing of keyboard and screen, which has obvious effect in dance bars and bars).
2. The camera has been modified (if you want to shoot for a long time, please go to Information-Information Settings-Multimedia Information Settings-Size Settings, and change it to None, and the shooting time is about 1 min for 30 seconds).
3. The boot bell has been modified (the boot bell can be customized. Pay attention to the same name, including case. Operation method: Rename the downloaded mp3 ringtone to Start~up.mp3[ startup ringtone, preferably about 3-5 seconds] and Power~down.mp3[ shutdown sound, preferably 3-5 seconds] and upload it to the ringtone directory of V3 with motokit, change the attribute to 70004, and restart after modification).
4. The on-off screen has been modified, which is the global on-off screen (you can customize the on-off screen, pay attention to the same name, including case. Operation method: rename the gif format picture of 176*220 you downloaded to custwakeup.gif[ startup picture], upload custgoodbye.gif[ shutdown picture] to the root directory of V3 with motokit, change the attribute to 70004, and restart after modification).
5. The off-screen picture has been modified (you can customize the off-screen picture, just rename the desired picture to cl.gif, upload it to the root directory -mobile-system of V3 with motokit, change the attribute to 70004, and restart after modification).
6. The event bell and the event light have been modified (it is recommended to adjust them to pulses so that incoming calls can flash).
7. The number of SMS center has been modified and can be set (there is no such setting option after some network versions are refreshed).
8. The configuration of Internet access functions including Monternet and QQ has been completely defined according to the licensing requirements.
9. It has been modified to reject incoming calls without flipping the cover (since this function cannot be backed up, please upload 005b _ 000 1. Use motokit's See function to manually view the files in the backup directory). This modification is to change the buttons on the right side of the external screen (the original voice button) and the original voice button into the Internet button.
10. The real caller ID has been modified to achieve the most suitable size.
1 1. There is an automatic update time option in the modified settings (GPRS and operator support are required).
12. It has been modified to have a chat room option in the office (just like Nokia SMS chat).
13, the function of the incoming call firewall has been modified. You can see it when you enter the security settings (usage: Settings-Security Settings-Call Restriction-Password 0000- No incoming call-Allow to use-None, so that the line will be busy when others call you. If you want to recover, change None to All).
14. The power saving mode has been modified (it is recommended to turn it on to save power).
15. The roaming prompt option has been modified.
16. The deleted item has been modified, and there is a confirmation prompt (if the phone number is deleted, SMS will prompt for confirmation).
17. The modified phone book can be searched and selected by name or initials (it can be queried by initials, for example, press 5 or 3 times).
18, continuous backlight, animation, status light and other options have been modified. Do not turn on the animation function. If you do this, you will find that the submenu icon you clicked will disappear. The modification method is: Settings-Initial Settings-Animation-Close. Do not turn on the status light function. If you do this, you will find that if you have a short message and you don't check it, the external screen will always be on. The modification method is: setting-initial setting-status light goes out).
19, call timing and other options have been modified.
20. Speed dial has been modified.
2 1. The function of introducing lightning has been modified (using the Bluetooth light on the external screen as the introducing lightning).
22. The function of starting the JAVA loader has been modified (in Settings -JAVA Settings -JAJA loader, JAVA software and games can be transferred to V3 through the computer. For details, please refer to the basic question: How to transfer the game to V3).
23. It has been modified so that the name can be displayed without matching all the numbers.
24. The function of opening SMS receipt has been modified.
25. The preferred card function has been modified (this requires dual cards).
26. Turn off the card to store short messages (because the card can only store 25-40 messages, while V3 itself can store about 100 messages).
27. The voice of the call and the size of the ringtone have been modified to make you hear more clearly.
28. The passwords of browser, mobile QQ and SIM card are all set to prevent misoperation. The password is 0000 (you can close this lock by yourself and then select the item you want to unlock).
29. The operator logo is blocked (i.e. China Mobile or China Unicom is not displayed).
30. Remove the options of downloading new pictures from pictures, downloading new ringtones from ringtones and downloading new games from games and applications.
After step A→B→C is completed.
Finally, use SkiMan to install the panel.
Use MPT to send your favorite pictures and ringtones.
Transfer JAVA software and JAVA games with MIDway
The above software has been downloaded in posts and forums. Find it yourself. Don't always say you can't find it.
There is no need to be complicated in the tutorial. Since you can brush the machine, I believe it won't be difficult for you.
Image and tutorial address:/thread-455900-1-1.html.