Panasonic SMT mounter occupies a high share in the middle and high-end market, and Panasonic is one of the troika of high-speed mounter, which benefits from its excellent performance, stability and good after-sales service.
Introduction to NPM:
Model name: NPM-W2, floor size: monorail * 1, and overall installation: L50mm× W50mm ~ L750mm× W550mm. Installation in two positions: l50mm× w50mm ~ l350mm× w550mm.
Double-track * 1 monorail drive: l50mm× w50mm ~ l750mm× w510mm. Double-track transmission: l50mm× w50mm ~ l750mm× w260mm.
Power supply: three-phase AC 200, 220, 380, 400, 420, 480V2.8kVA, air pressure source * 2: 0.5mpa, 200 L/min (A.N.R.).
Equipment size * 2: w1280mm * 3× d2332mm * 4× h1444mm * 5.
Weight: 2470kg (main body only: it varies according to the composition of the optional parts. )
Extended data:
Matters needing attention in the use of mounter
1. Machine operators should be trained in correct methods.
2, check the machine, replace parts or repair and internal adjustment should turn off the power supply (the maintenance of the machine must be carried out under the condition of pressing panic button or turning off the power supply.
3. When "reading coordinates" and adjusting the machine, please make sure that YPU (programming part) is in your hand, so as to stop at any time.
4. Ensure that the "interlocking" safety equipment can effectively stop the machine at any time, and the safety inspection of the machine cannot be skipped or shortened, otherwise personal or machine safety accidents may easily occur.
In the production process, only one operator is allowed to operate one machine.
6. During the operation, ensure that all parts of the body, such as hands and head, are outside the moving range of the machine.
7. The machine must be properly grounded.
8. Don't use the machine in gas or extremely dirty environment.
Baidu encyclopedia-mounter
Baidu encyclopedia-Panasonic