There will be a blue screen on TV and a "blue screen" on computer. There will be a series of warnings when the computer appears "blue screen". Light can press ESC to return, heavy will collapse, which is very annoying. There are two kinds of "blue screen", one is caused by software and the other is caused by hardware. The "blue screen" fault caused by software can generally be solved by reinstalling the system. But it can be solved without reinstalling the system. The "blue screen" fault caused by hardware should be solved according to the specific situation.
First, the "blue screen" fault caused by software
1. Damage or loss of important files will lead to "blue screen" failures (including viruses).
When important files such as VxD (Virtual Device Driver) or. DLL (dynamic link library) is lost in WIN. The solution is to use the "Ext" in the Win startup disk to recover the damaged or lost files. The steps are as follows:
(1), first start the computer with WIN's startup disk and type the "Ext" command at the prompt;
(2) After the prompt "Please enter the path of Windows Cab file (A):", enter the complete path where the WIN installation package is located, and press enter, such as "E: \ PWIN2003 \ WIN2003;
(3) After the prompt "Please enter the name of the file you want to decompress:", enter the file name you lost, such as "BIOS". Vxd ",and press enter;
(4) After the unzipping path prompts "Please enter the path to unzip ('Enter' indicates the current directory)", enter the complete path to which the file will be unzipped, such as "C:\Windows\System", and then press Enter. When prompted later, just press Yes and press Enter, and the system can be restored after restarting. Note: because the lost file name was written down in advance for recovery)
If it is caused by a virus, you can use antivirus software to kill the virus and restore the backup before poisoning in time;
If you can start the graphical interface, you can reinstall the drivers of the motherboard and graphics card, and perform a "system file scan" to recover damaged or lost files, which can be found in the system tools attached to the start menu;
2. "Blue screen" caused by file pointing error due to registry damage.
After the registry is changed or destroyed, a "blue screen" appears when booting or calling the program, and there is an error message (including the wrong file name) on the screen.
-The solution is to restore the registry backup, restart the computer, switch to MS-DOS mode, enter the Windows subdirectory, type Scanreg\regstore, and then press enter to restore the latest registry.
3. The "blue screen" appears after uninstalling the program, which is mostly caused by the imperfect uninstallation of the program. Solution: First write down the wrong file name, then find the following branch "HKEY _ Local _ Machine \ System \ Current Control Set \ Service \ vxd" in the registry, enter the wrong file name in "Search" and delete the found key value.
4. The "blue screen" caused by the error in the System.ini file is caused by the failure to update the system.ini immediately when uninstalling or installing the software. Solution: disable this item in the registry or reinstall the corresponding software or driver;
Because the spl of Win98 and the patch Vxd_fix.exe of Microsoft play an important role in the stability of Win98, you can download the patch Vxd_fix.exe from the website of Huajun.
5. The exhaustion of system resources leads to blue screen. This failure is mainly related to the occupation of three piles of resources (system resources, user resources and GDI resources).
-Open the Resource Monitor to see the remaining resources. If these three resources are all at 50% or even lower, it is easy to have "illegal operation", "blue screen" and "crash". Therefore, we must reduce the waste of resources, reduce unnecessary program loading, and avoid running large-scale programs (such as graphics, sound, and video software) at the same time, such as loading task planning programs, input methods and sound instructions, DOS drivers for sound cards, and system monitoring programs.
6. "Blue screen" failure caused by 6.DirexctX problem. For example, DirectX version is too high or too low; The game is incompatible or not supported; The auxiliary file is missing; The graphics card is not supported, which may cause this failure. Upgrade or reinstall DirectX, try to update the BIOS and drivers of the graphics card, or upgrade the graphics card.
7. The software is incompatible.
Second, the "blue screen" failure caused by hardware
This failure mainly includes the following types:
1. Memory is overclocked or unstable. There are mainly random "blue screens". Restoring normal frequency operation, or finding a good memory stick to replace it, can generally solve the problem, but we should also pay attention to the heat dissipation problem near the CPU memory stick;
2. "Blue screen" caused by poor hardware compatibility. Because the DIY door uses a compatible computer and has not been thoroughly monitored, it has left problems, such as the mixed insertion of different specifications of memory chips. The problem can be solved by replacing the bad bit inserted in the memory stick or replacing the memory stick with the same specification, manufacturer and batch number. The quality of memory directly affects the stability of the system, so we should pay special attention to it;
3. Hardware heat dissipation problems will also cause "blue screen". This kind of fault often has a certain rule, which usually appears after the computer runs for a period of time. During the performance, the "blue screen" crashed or restarted at will. The solution is simple. Do not overclock at will, and strengthen the heat dissipation inside the machine.
4.I/O conflicts can also lead to "blue screen". This phenomenon is rare. If it appears, you can delete the tape from the system! Number or? The name of the device, restart the computer, generally can be solved.
Third, preventive measures.
In short, if you want to nip in the bud, as long as you can do the following things at ordinary times, you can effectively avoid "blue screen" or crash.
1. Back up the registry regularly, and restore it to its original state in time when errors occur;
2. Try to avoid abnormal shutdown, which can reduce the loss of important files. Such as the vxd.dll document;
3. Generally speaking, the computer can work normally, and there is no need to upgrade BIOS and drivers such as graphics cards and motherboards to avoid damaging the machine;
4. Run the System File Checker regularly to check the system files; You can find it in System Tools.
5. Reduce the installation of useless files, try not to manually uninstall or delete programs, and reduce illegal replacement of files and file pointing errors;
6. Try to avoid running large programs at the same time. If you find a rustling sound while listening to MP3, you can be sure that the failure is caused by insufficient memory.
Finally, the blue screen code,
Ji Chuan Shirahara
Please moderator "suit the remedy to the case"
Windows blue screen error code
0X0000 operation completed.
0X000 1 incorrect function
0X0002 The system cannot find the specified file.
0X0003 The system could not find the specified path.
0X0004 The system cannot open the file.
0X0005 Access denied
0X0006 Invalid code.
0X0007 The memory control module is damaged.
0X0008 There is not enough memory space to process this instruction.
0X0009 The memory control module address is invalid.
0X000A environment is incorrect.
0X000B tried to load a malformed program.
0X000C access code error.
0X000D data error
0X000E There is not enough memory space to complete the operation.
0X000F system cannot find the specified hard disk.
0X00 10 cannot delete the directory.
0X00 1 1 The system cannot move files to other hard disks.
0X00 12 has no file.
0X00 19 cannot find the specified sector or track.
0X00 1A cannot access the specified disk or floppy disk.
0X00 1B disk cannot find the required device.
0X00 1C printer has no paper.
0X00 1D system cannot write data to the specified disk.
0X00 1E system cannot read the specified device.
The device connected to the system does not work.
A part of the file 0X002 1 is locked and cannot be accessed now.
0X0024 There are too many open shared files.
0X0026 reached the end of the file.
0X0027 Disk is full.
0X0036 The network is busy
0X003B An unexpected error occurred in the network.
0X0043 The network name could not be found.
0X0050 file already exists.
0X0052 Unable to create directory or file.
0X0053 INT24 failed (what do you mean? Please also ask the master to give directions to the webmaster.
0X006B The program has stopped because no substitute disk was inserted.
0X006C disk is in use or locked.
0X006F file name is too long.
0X0070 Insufficient hard disk space.
0X007F The specified program cannot be found.
0X045B system is shutting down.
0X045C cannot abort the system shutdown because there is no shutdown in progress.
0X046A The available server storage space is insufficient.
0X0475 The system BIOS cannot change the system power state.
The program specified by 0X047E requires a new version of windows.
0X047F specified program is not a windows or ms-dos program.
0X0480 The specified program has been started, so it cannot be started again.
0x0048 1 specifies the program written for the old version of windows.
0X0482 A library file required to execute this application is corrupted.
0X0483 No application is associated with the specified file for this operation.
0X0484 Invalid transfer instruction for application.
0X05A2 The specified device name is invalid.
0X05AA system resources are insufficient to complete the required services.
0X05AB system resources are insufficient to complete the required services.
0X05AC system resources are insufficient to complete the required services.
0X06B9 Insufficient resources to complete the operation.