Tutorial of using PS to retouch backlit pictures;
1. Open the material, use Ctrl+J to copy the layer, select the filter CameraRAW, adjust the color temperature +3, exposure+1.05, highlight -86, shadow +69, black -62, clarity+10, and natural saturation +6.
2. Select the tone curve, red, green and blue, and adjust them respectively. Select the number of detail sharpening 5 1. Reduce the noise brightness 16.
3. Choose HSL/ gray tones orange -4 and yellow -3. Saturation is red+13, orange +5 and yellow +6. Brightness orange -4, yellow -3.
4. Select the sub-tone highlight tone 203 with saturation of 6. Shade tone 38, saturation 15. Select the number of effect particles 19, size 30 and roughness 54.
5. Select the camera to calibrate the hue and saturation of the red primary color +4 1 and+14. Green primary color hue +4 1, saturation +25. The primary color tone of blue is -28, and the saturation is +3 1.
6. Enter PS and select the stain repair brush tool for repair. Select liquefaction filter and make liquefaction adjustment.
7. Create a new optional color red cyan -7%. Yellow and cyan -30%. New color balance shadows red +3, yellow -3. High gloss cyan -3, blue +3.
8.Ctrl+Alt+Shift+E stamps the layer. Select the soft edge circle of the dodge tool, adjust the middle tone, expose it to 8%, and smear it.
9. Select Filter Sharpening Intelligent Sharpening, and click OK, as shown in the figure.
10. Final effect
The above is the operation flow of modifying backlight portrait pictures with PS. Will friends feel full of gains? Get out your computer and do it. In practice, backlight portrait processing will deepen your impression.