Grasp the locking tongue on the seat belt head and pull down the seat belt along your body. Be careful not to kink the seat belt. If you pull it too fast, the seat belt may lock. At this time, you can pull it back a little to unlock it, and then slowly pull it down.

Secure the locking tongue on the buckle until it clicks. Pull up the bolt and check whether it is locked. Check the position of the release button on the retaining ring. This button must be easy to operate so that the seat belt can be unfastened in case of any accident. To fasten the belt, pull down the belt at the buckle end and pull up the shoulder strap at the same time.

Precautions for car seat belts

Foam cleaner can be used to clean car seat belts. Foam cleaning agent is omnipotent. I believe that almost all riders have used it more than once. Be careful not to use too corrosive decontamination products, because this will reduce the safety of seat belt materials, and do not use hard brush to brush, so as not to reduce the tensile strength of seat belts.

The owner should check whether the seat belt is aging and loses tension during normal use. These operations are relatively simple. In addition, the owner usually needs the position of the buckle, so make sure that this button must be accessible and easy to open so that the seat belt can be unfastened in case of an accident.