Set up a company (non-self-employed) and go to the industrial and commercial department for pre-approval of the company name.
Go to the quality supervision department to assign the organization code certificate, and go to the quality supervision bureau to apply for the production license, that is, QS certificate.
Then apply for business license, organization code certificate, and then apply for food circulation license in the industrial and commercial department before processing qualification. These certificates will take about 6 months, about 1 10,000 yuan.
The most difficult thing is the production license, which involves the production workshop, dressing room, washing room, laboratory, warehouse, inspection device, production device and inspection personnel (at least 2 people).
What documents do I need to run a small processing factory? At present, according to the Company Law, the minimum registered capital of a limited company with two or more persons is 30,000 (see Article 26 of Chapter II 1 of the new Company Law); 1 person The minimum registered capital of a limited liability company is 1 10,000 (see Article 59 in Section 3 of Chapter II of the New Company Law); This rule basically applies to most companies.
According to our experience, you need to be prepared in the following aspects during the whole registration process:
1. Provide copies of your and investors' ID cards by attachment transmission, express delivery or other means, indicating the registered capital of the company and the capital contribution of all investors, and prepare the names of at least five companies in advance;
2. You need to choose the nearest bank to handle the capital injection procedures;
3. You need to bring your ID card to the industrial and commercial office for signature verification;
4. After all the documents are processed, you need to choose the nearest bank to handle basic account and tax accounts;
5. All other formalities should be completed by relevant departments.
The registration process is as follows:
Check the name (confirm the name of the company) → verify the capital (complete the capital verification procedures of the registered capital of the company) → sign (the customer verifies the signature at the industrial and commercial office) → apply for the business license → apply for the organization code certificate → apply for the tax registration certificate → apply for the basic deposit account and tax account → apply for the tax registration → apply for the tax verification → apply for the stamp duty business → apply for the taxpayer identification → apply for the collector identification → apply for the invoice collection.
Specific process description:
Industrial and commercial processes:
First, name search (time-consuming 1 week)
The required information is provided by you:
1. Copies of ID cards of all investors (if the investor is a company, a copy of the business license is required).
2. The registered capital and the capital contribution of all investors.
3 company names (preferably more than 5) and the general business scope of the company.
After the name search data is prepared, it will be accepted by the relevant departments, and the procedures required for name search will be completed by the relevant departments. After the name search is passed, you will be notified in advance and a copy of the name search approval form, a set of seals (corporate seal, corporate seal and shareholder seal) and a bank confirmation letter will be issued.
Two. Capital verification (i.e. once completed)
You can go to your nearest bank to deposit the registered capital with the approval form for name search, bank confirmation letter and a set of seals, and then receive the investor's payment slip and statement from the bank. The bank confirmation letter will be sent directly to the accounting firm, which will then handle the capital verification report.
Two capital verification reports will be issued after the capital verification is passed.
Capital verification must be done by yourself. Entrust other institutions to undertake relevant responsibilities. For details, please refer to Chapter 12 Legal Liability of the new Company Law.
III. Signature (i.e. completion)
You take your ID card to the industrial and commercial office to sign it, and the industrial and commercial office will pass it after verification.
The signature needs to be present in person, and the signature will take effect after the industrial and commercial personnel confirm that I am correct. After the signature is passed, the business license can begin.
Iv. application for business license (2 weeks)
The required materials are for reference only, and all materials are provided by relevant departments:
1. Application for registration of company establishment signed by the chairman or executive director of the company;
2. Power of attorney for the company to apply for registration;
3. Resolution of shareholders' meeting;
4. Resolutions of the board of directors;
5. Resolution of the Board of Supervisors;
6. Articles of Association;
7. The legal person qualification certificate or natural person identity certificate of the shareholders or promoters;
8. Certificates of appointment of directors, supervisors, managers, chairmen or directors;
9. Copies of ID cards of directors, supervisors and managers;
10. Capital verification report;
1 1. Proof of residence use (rental agreement, property right certificate);
12. In the business scope of the company, the approval documents of the department shall be submitted for the projects that must be submitted for approval according to laws and regulations.
After the information is complete, the relevant departments will complete all procedures, submit them to the Industrial and Commercial Bureau for review, and then issue the original and duplicate business licenses and electronic business licenses, and then complete the industrial and commercial bureau process.
The following is the process of Quality Supervision Bureau.
Apply for organization code certificate (required 1 week)
The procedures and required information in this step are provided and completed by relevant departments. After handling the organization code certificate at the Quality Supervision Bureau, the process ends after the Quality Supervision Bureau issues the original and duplicate code certificates and code certificates.
The following is the process of the Inland Revenue Department:
Apply for tax registration certificate (it takes 2 weeks)
Information provided by 1.: The required information is for your reference only, and all information is provided by relevant departments.
1. One original and one copy of the Business License of Enterprise as a Legal Person;
2. One original and one copy of the unified code certificate of the organization;
3. One original and one copy of the capital verification report;
4 articles of association or agreement or feasibility study report or contract and its original copy;
5. The original and photocopy of the resident ID cards of the legal representative, financial controller and taxpayer 1 copy each;
6. One original and one copy of the property right or use right or lease certificate (stamped with stamp duty) of the business premises.
2. Fill in the form and submit it to the Municipal Bureau: The required steps are for reference only, and all procedures are operated by relevant departments.
Fill in the tax registration form and other schedules, and submit them to the Municipal Taxation Bureau together with the required materials after being signed by the director of the tax office (all handled by the relevant departments). After approval, print the tax registration certificate, receive the tax registration certificate, and end the tax bureau process.
At this point, after all the documents have been processed, you can get all the relevant documents after paying the processing fee, and then go to the nearest bank to handle basic deposit account and tax accounts (the relevant departments provide detailed information and steps for handling this business).
Follow-up procedures: (Six follow-up procedures * * * are completed at the tax office, and all materials required for the procedures are provided and completed by relevant departments).
1. tax registration: according to your company's situation, determine the nature of the company (trade tax rate 4%, production tax rate 6%, service tax rate 5%, etc.). ), provide relevant information, fill in relevant forms and submit them to the tax Commissioner;
2. Handling income tax verification: generally, it is approved to collect income tax. After providing relevant information, fill in relevant forms and submit them to the tax Commissioner;
3. Handling stamp duty business: according to the size of your company, provide relevant information and fill in the form to purchase relevant stamp duty tickets;
4. Taxpayer identification: according to the registration of your company, provide relevant information, fill in the form and submit it to the tax Commissioner;
5. Apply for tax collector's identity certificate: after providing relevant information, fill in the form and submit it to the tax Commissioner to apply for tax collector's certificate for your company's personnel;
6. Apply for invoice subscription: According to the types of invoices your company needs, provide relevant information, fill in the form and submit it to the tax commissioner for invoice application.
Addendum 2 2007-11-1715:14
I found the answer myself.
Addendum 3 2007-11-1715:15
The establishment of the institution you mentioned requires the following procedures:
1。 Recognized company
2。 Apply for a health permit.
3。 Register.
4。 Carve the official seal.
5。 Handling organization code.
6。 Set up a company account.
7。 Go through the tax registration.
8。 Get the receipt.
9。 Opened successfully.
What procedures do I need to open a small processing factory myself? If there are many such devices on the Internet, the procedure is: take your site certificate or lease contract (and copy) and your ID card (and copy) to the industrial and commercial department to apply for individual business license. Before going to tax, do a good job in obtaining the license, and handle individual tax registration with a copy of the certificate, my ID card, site certificate or lease contract, and the lessor's landlord ID card.
What documents do I need to open a small electrical appliance processing factory? You need to register a small production company, apply for a business license, and then apply for a tax registration certificate, so that you can legally produce and operate.
To start a small company, you need to prepare the company's registered capital, with a minimum registered capital of 3W, and then rent the production plant, and bring the lease contract and ID card to the industrial and commercial bureau to apply for registration. The registration fee is about 3000 yuan, and the processing time needs 15-20 days.
You can also look at the detailed process description of the newly registered company.
Please adopt me!
What procedures do you need to go through to open a pepper processing factory?
Set up a company (non-self-employed) and go to the industrial and commercial department for pre-approval of the company name.
Go to the quality supervision department to assign the organization code certificate, and go to the quality supervision bureau to apply for the production license, that is, QS certificate.
Then apply for business license, organization code certificate, and then apply for food circulation license in the industrial and commercial department before processing qualification. These certificates will take about 6 months, about 1 10,000 yuan.
The most difficult thing is the production license, which involves the production workshop, dressing room, washing room, laboratory, warehouse, inspection device, production device and inspection personnel (at least 2 people).
What are the procedures for opening a small processing factory? There are many such devices on the Internet, and the procedures are as follows:
1. Take your site certificate or lease contract (and copy) and your ID card (and copy) to the industrial and commercial department to apply for individual business license.
2. Get the license first and then go to tax. With a copy of the license (and a copy), my ID card (and a copy), site certificate or lease contract (and a copy), and a copy of the lessor's landlord's ID card, I will handle the tax registration.
I want to set up a small stereotypes processing factory. What documents do I need to apply for? It is urgent to register a small production company, apply for a business license, and then apply for a tax registration certificate, so as to legally produce and operate.
To start a small company, you need to prepare the company's registered capital, with a minimum registered capital of 3W, and then rent the production plant, and bring the lease contract and ID card to the industrial and commercial bureau to apply for registration. The registration fee is about 3000 yuan, and the processing time needs 15-20 days.
You can also look at the detailed process description of the newly registered company.
:lxww . blogspot . com/2008/09/ 19。
What documents do I need to apply for to open a small toilet paper processing factory in a rural yard? At the beginning, you must have a business license when you produce. You don't need other prophase, but you must have this one. Only with this can you start production. Generally, after completing these procedures, you can operate!
What documents do you need to open a small garment processing factory? The requirements are as follows: 1. If you don't know clothes, you have to find a partner or an experienced master. 2, you can only do processing for others. If hundreds of thousands are not enough, you won't just watch, find two people to study slowly together, and when there is an order, you can only stay up late. 3. To take orders, you should have a solid and excellent staff with basic skills, but first you should have contacts, that is, acquaintances. ...