RTK has two receiving methods: external network and internal network. The external network should be equipped with a launch pad. If you use the built-in network, you can use a flow card or a phone card. After the base station is set up, you can start setting up the base station. Smooth the base station first, and then see if the base station transmits signals.

Generally, the signal will be transmitted normally when connected. Then open the RTK of the mobile station and set the same channel as the main station. After receiving the signal and repairing it, the mobile station can proceed to the next step. First, create a daily file. After the file is created, measure the control points. After measuring the points, enter the original control points in the notebook. Then calculate the parameters in the parameter calculation.

When the parameters are normal, you can save the settings. The next step is to start the measurement. We usually receive dozens of satellites. If there are more than 8 * * * satellites, it is a fixed solution and can be measured normally. If it is a floating solution, the latter is a pseudorange, and the single-point solution cannot be measured. The measured data are far from each other. This is the normal usage of RTK.

Mbth (rtk) is a measurement method that can get centimeter-level positioning accuracy in real time in the field, and its appearance greatly improves the efficiency of field work.