Read the construction instructions

Please read the construction instructions before construction.

Use high-quality building tools

High-quality construction tools should be used, and the new brush should be cleaned with a suitable cleaner to remove grease before use. The roller should be wetted with water before use, and short-haired roller is recommended.

Fully stir

Fully mix before construction.

Don't dilute it too much.

If necessary, add 30% (by volume) water according to the instructions, and do not over-dilute.

Avoid excessive coating.

During construction, avoid excessive paint on the paint brush or roller.

Do not pour it back into the original packaging.

Do not pour the diluted product back into the original packaging.

Use up the opened products as soon as possible.

Please use up the canned products as soon as possible.

Pay attention to temperature and humidity.

When the foundation temperature is lower than 5℃ or the ambient humidity is higher than 85%, construction is not allowed.

Clean tools in time.

Used tools should be washed with clean water immediately.

Control dilution rate

When constructing dark or bright products, please control the dilution ratio within 5% or not, and increase the brushing times appropriately until satisfactory results are achieved.