1. medium density fiberboard

Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber as raw material and urea-formaldehyde resin or other suitable adhesives. It is divided into high density board, medium density board and low density board.

Plate specification: the conventional specification is1220mm x 2440mm x 2mm ~ 30mm; Special specifications need to be customized

2. Big core board

Known in the industry as blockboard; It is made up of two veneers glued together and spliced in the middle. The price of large core board is cheaper than that of thin core board, and its flexural and compressive strength is poor, but its transverse flexural and compressive strength is higher.

Plate specification: 2440mm *1220mm; According to the thickness, it is generally 3, 5 and 9 cm.

3. Core plate

Particleboard is a thin board made of sawdust as the main raw material, adding glue and additives, which can be divided into two categories: extruded particleboard and flat particleboard.

Plate specification: 1220*2440mm Special thickness: 25-45mm.

4. Melamine cardboard

This is a melamine impregnated paper veneer wood-based panel. It is a decorative board made by soaking different colors or textures of paper in melamine resin glue, then drying to a certain curing degree, laying it flat on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressing.

Plate specification: 2440mm* 1220mm.

5. Gypsum board

Gypsum board is made of gypsum as the main raw material, with additives and fibers. It has the characteristics of heat insulation, sound absorption, light weight and incombustibility. Gypsum board and light steel keel are the materials that make up gypsum board ceiling. It also has paper plasterboard and hollow plasterboard. Gypsum board is used more for partition than for ceiling.

Plate specification: 2400 *1200 * 9.5 ~12; 3000* 1200*9.5~ 12; 2440* 1220*9.5~ 12; 1800* 1200*9.5 (in millimeters)

6.plywood

Commonly known as thin core board in the industry, it is made of three or more layers of veneer or thin plate with a thickness of 1 mm by hot pressing. It is the most commonly used material in handmade furniture at present.

Plate specifications: 6 specifications: 3mm, 5mm, 9mm, 12mm, 15mm, 18mm.

art cover

It is a decorative board with one-sided decoration function, which is made of solid wood board accurately planed into thin veneer with a thickness of about 0.2 mm, and plywood as the base material, and made by adhesive bonding process.

Specification of plate: thickness is 3mm.