First, the advantages of electric heating
1. The temperature rises rapidly.
The traditional heating rate is 2 hours, and Planck carbon crystal wall is used for heating. Generally, 15 minutes can reach 18 degrees Celsius.
2. Comfortable heating
Uniform heating, uniform and constant heat energy from bottom to top, fully meeting the needs of human body. Show the concept of "warm feet and cool head" advocated by Chinese medicine.
3. High efficiency, energy saving and environmental protection
The electrothermal conversion rate of Planck carbon crystal wall heating system is more than 99.8%, which is the highest electrothermal conversion rate in the market at present. The heating rate is fast, energy and electricity are saved, and the operating cost is less than that of the traditional method. No harmful gas emission, no noise and dust pollution, no air blockage and drying problems.
4. Health care function
Using the new far-infrared radiation principle, far-infrared waves are constantly generated during operation. It has obvious curative effect on cardiovascular diseases, lumbago and leg pain, arthritis, scapulohumeral periarthritis, cervical spondylosis, gastrointestinal diseases and gynecological diseases.
5. Simple structure
The main components of Planck carbon crystal wall heating system are carbon crystal heating plate, power supply connecting wire and temperature controller. The construction and installation are very simple. No matter the whole heating or local supplementary heating, there is no restriction on the design and auxiliary installation of the system, and the design concept of "people-oriented" is completely achieved.
6. Easy installation
Planck carbon crystal wall heating only needs to fix the heating plate on the wall. The floor heating can be installed by ordinary electricians only by adding the design in the decoration project, and it can be laid in a short time, with low cost and local installation, which does not occupy the household area and relieves the tense living environment.
7. Low operating costs
This product is installed in the national standard energy-saving residence with a building area of 100 square meter. Run all day, and keep the room temperature at 18-20 degrees Celsius. The cost of heating in winter is about one third less than that of central heating and more than 40% less than that of air conditioning.
8. Flexibility control
Every room in the room is equipped with a thermostat, which can be controlled independently, so that people can immediately heat up and stop as soon as they are far away, just like a power switch.
9. Long service life
The service life is more than 50 years, and it can be installed and molded at one time without replacement and maintenance.
10. Safe and reliable
Excellent waterproof performance, not afraid of perforation, and its insulation is not conductive.
Second, the use of electric common sense
1. Correct selection and use of power switch
The oil-immersed radiator heater adopts two sets of sealed cathode electric heating tubes as heating elements, and the two sets of electric heating tubes are correspondingly provided with two-level selector switches. Common heaters on the market are 1500W and 2000W w. When waiting for the line to allow, the correct selection of power gear can save electricity and reduce the line load. When the heater is turned on or the indoor temperature is low, turn on the two-speed selector switch at the same time, and the heater will heat up quickly. When the working temperature of the shell surface reaches the set temperature point, the thermostat will automatically cut off the power supply. At this time, you should choose 1 or a power of 2. When the thermostat is reset and powered on, it heats with low power to gradually increase the indoor temperature.
2. Pay attention to keep the room airtight.
The oil-filled radiator heater raises the indoor temperature in the form of air convection, and the indoor temperature affects the on-off of the power supply. Good indoor sealing, short heating time and long heat dissipation time after the room temperature rises, thus saving electricity.
3. No cover
The heater works normally, and the surface temperature of the shell is high, which is generally set at about 90℃. The temperature control of the heater depends on the temperature-induced deformation of the thermostat metal sheet in the mask. If the periphery of the heat sink is wrapped and covered for baking clothes, the temperature of the covered heat sink will be significantly higher than the temperature felt by the bimetal in the plane, which will easily scorch the clothes and may lead to the damage of the heat conducting elements inside the heater shell. It is forbidden to invert or pour the special heat transfer oil into the shell of the electric heater. After heating, there is a certain pressure inside. In order to ensure that the internal pressure is lower than 0.2Mpa in normal use, the amount of heat transfer oil is about 70% of the total volume, and the internal space is large. Inverted or put down, the internal heating pipe is exposed to the oil level. In this case, electric heating may lead to overheating and cracking, thus damaging the heating pipe. In this case, you must pay attention to it when using it.
4. How to place the oil-filled electric heater?
The oil-filled electric heater must be placed directly and cannot be inverted. Because the oil-filled electric heater heats the heat-conducting oil around the heating element through the heating tube at the lower end, the heat-conducting oil flows in the conduit to transfer heat. If you turn it upside down, flat or inclined, it will cause empty burning to burn out the heating tube.
You can't cover anything on the electric heater.
The electric heater is a constant temperature heater. Because of its high surface temperature, the surface of the electric heater cannot be covered with anything, otherwise it will be burned because the heat of the electric heater cannot be dissipated in time. When using a special dryer to dry wet clothes, be sure to wring out the water to avoid danger caused by water drops in the control box of electric heater (except waterproof ones).
6. What are the requirements of electric heaters for power supply?
When using electric heaters, three hole socket with grounding wire whose technical indicators meet the standard must be used. Never switch to a two-hole socket without a ground wire, because it is easy to generate static electricity, and sometimes it will feel like an electric hand, which is more dangerous. In addition, the socket should not be located directly above the electric heater to prevent the heat from rising and burning out the power supply. Third, whether there are electrical appliances that are easy to cause sudden changes in current and are frequently used, such as electric welding machines and impact drills. It is easy to damage the electric heater, so be careful. It is best to use a patch panel with over-current protection device, or choose a regulated power supply.
7. Air-drying: The clothes rack has no electric heater, so never cover the clothes on the heater. By doing so, on the one hand, clothes can be prevented from being scalded, and on the other hand, the pressure of heat transfer oil inside the heater shell can be prevented from rising, resulting in hot oil leakage and cracking of the shell.
8. Installation: Even the waterproof heater should not be too close to the bathtub, washbasin and shower pool. When taking a bath, try to avoid spraying water directly on the bathroom heater. Never put the bathroom heater directly under the power socket, because the rising hot air released by the heater can easily burn the socket.
9. Baking: In winter, the skin is exposed to heating equipment such as electric heaters, electric blankets and hand warmers for a long time. After the skin is exposed to the temperature higher than the body surface for a long time, different shades of brown reticular plaques will grow on the arms and face. These plaques belong to fire-induced erythema, and if they are not treated in time, they may also make the blood vessels of the skin dilate and proliferate, and make the skin age early. Patients should reduce or stop contact with heat sources and recuperate slowly. In winter, they must pay special attention to hydrating and moisturizing, and usually drink plenty of water.
Electric heating has indeed entered every household in Qian Qian. Because of its simplicity, environmental protection and convenience, it occupies a certain market position and is favored by the masses. If you don't have this small household appliance at home, act quickly and buy it quickly.