Question 2: How to raise and cultivate the plant Kirin?
The white milk in eucalyptus stems is poisonous, especially not in eyes. Therefore, attention should be paid to prevent children from eating by mistake in family training.
At the first China Flower Expo, the jade unicorn presented by Guangxi won the Excellence Award and was selected as one of the precious flowers cultivated for a long time.
Training requirements
Yu Qilin likes soil with good drainage and air permeability. Potted plants should be well drained sand, not too fat. Potted soil can be made by drying and crushing fish pond mud and mixing it with 20% sand; Or 4 parts of garden soil, 4 parts of humus soil and 2 parts of sand. After planting the pot, water it. According to the actual situation in the future, watering every two or three days can be less than that of general broad-leaved trees, but slightly more than that of leafless cactus. Jade unicorn can apply light liquid fertilizer once a month during the growing period.
1. Summer and autumn management: Summer and autumn are the peak season for the growth of Jade Kirin. Although it likes sunshine, it is afraid of being exposed to strong sunlight. Bamboo curtain, reed foil or double-layer window screen can be used for shading, and the light transmittance of 60% is better. Too strong sunlight will cause the leaves to turn yellow, which will affect the growth and appreciation. Drought resistance, watering should be less and not more, and master the principle of "no watering, no watering, no watering"; It is also necessary to prevent continuous rain in summer and autumn. Water accumulation in the basin and long-term over-wet soil in the basin will cause rotten roots or abnormal stem rot. Not suitable for fattening, you can apply thin bean cake water, sesame sauce residue water or horseshoe palm water once a month. Too much fertilizer and too much shading often lead to white growth of plants, and palm-shaped deformed stems grow into columnar fleshy stems grown from original seeds, which seriously reduces the ornamental value.
2. Winter and spring management: Jade Kirin is not cold-tolerant. In China, except for some areas in South China and Southwest China, all other areas are potted plants, which are required to be placed in sunny rooms in winter. Generally, it will be moved indoors for the winter before the frost in the middle of June 5438+10/early October. Keep the indoor temperature above 15℃ and the leaves will not turn yellow; When the room temperature is lower than 12℃, the fleshy leaves will fall off and the plants will enter a dormant state. Water should be controlled during dormancy, and the soil in the basin should be kept as dry as possible. Only when the temperature rises gradually in spring can the amount of water be increased gradually. After warm weather, it can be placed on the balcony or yard, but watering should be controlled slightly to avoid too much water. When the room temperature is kept above 6℃, when the pot soil is dry, the deformed stems will not freeze, and new leaves will grow the next year.
Water less in winter than in the growing season, and keep the soil slightly wet. Fertilization should be stopped in winter. The temperature is getting higher and higher in spring, so you can change pots between Qingming and Grain Rain. When changing pots, remove the old soil, root soil and rotten roots. After changing pots, keep the soil moist, leave it indoors for about 10 days, and then move it out gradually. Jade Kirin usually moves out of the house after the temperature in Grain Rain stabilizes. The amount of water should be less at first, and it should be increased with the increase of temperature.
Breeding mode
Jade Kirin is generally propagated by cutting, and can be cut from April to10. Cutting time should be chosen in sunny morning. Cut off a strong and abnormal stem and let it cool for 3-4 days. After the wound shrinks, it can be inserted into clean river sand for about 2-3 cm without watering first. After 2 days, spray water to keep the soil moist, take root in about one month, and then transplant it into a pot. When cutting abnormal stem blocks, white milk is easy to flow out, so it should be cleaned or washed away with water to avoid drying the juice, sealing the incision and affecting rooting. Dry in the shade after cutting. Keep it moist, but avoid water in the incision, which will rot the cuttings.
Eliminate pests and diseases
Jade unicorn has fewer pests and diseases, but it is prone to scale insects because of poor ventilation in greenhouses or places for a long time. In winter and spring, leaf dust can be sprayed with clear water every 10 day. In addition, it is very sensitive to gas, and it is easy to cause defoliation after fumigation (it can be used to prevent gas leakage indoors).
Question 3: How is the Kirin tree raised? Kirin palm, also known as unicorn horn, is a perennial plant and a variety of overlord whip. The deformed stem is green at first, and then gradually lignified into yellow-brown big yam-like thick branches, with dense tumor-like small protrusions on the branches, and dense leaves at the top and around the stem, which are obovate and entire. Kirin palm is a good indoor ornamental flower because of its peculiar shape and evergreen seasons.
The unicorn palm is propagated by cutting. From May to June, select healthy deformed stems, cut them off with a sharp knife, dry the wound mucus, soak them in plant ash for two or three days, and then insert them into wet river sand with a depth of 3 cm-4 cm, and compact them by hand without watering. Spray water after 2-3 days. As long as the sandy loam remains slightly wet, spray water. It takes about a month to take root, and then it can be cooked.
The pot soil of potted unicorn palm is composed of 3 parts of vegetable garden soil, 3 parts of decomposed manure and 4 parts of river sand. When planting, first spread a layer (2 cm-3 cm) of slag or coarse sand on the bottom of the flowerpot to facilitate drainage and prevent waterlogging from rotting the roots. After the basin is put away, water it, first put it in the shade for a week, then move it to weak light, and then gradually move it to strong light. It is drought-resistant, so it is necessary to water less and not more, and master the principle of seeing dry and seeing wet. Kirin palm should not be fat, thin cakes and fat water can be coated once a month.
Kirin palm is native to tropical areas and likes warm, humid and sunny environment. However, it is afraid of being exposed to the hot sun. Summer and autumn are the peak of growth, so it should be placed in a semi-shady place to avoid direct sunlight all day. It likes drought, so don't water it too much, as long as the soil is slightly wet in summer. Kirin palm is not cold-resistant, so it should be moved indoors or into greenhouse before frost in the middle of June+10/early October in the north of 5438. When the temperature is low in winter, the basin soil should be kept dry. As long as the room temperature is above 15℃, the leaves will not turn yellow, and below 12℃, the leaves will dry up and fall off. /kloc-change the basin once every 0/-2 years. When changing pots, remove old soil and rotten roots. After changing pots, keep the soil moist and leave it indoors for about ten days before moving out.
Question 4: How to raise unicorn flowers? Generally speaking, family flowers should be cultivated at the right time, in the right place, in the right humidity, in the right temperature and in the right light. That is to say, different conservation and management methods should be formulated according to the habits of each flower, whether it is watering, lighting, fertilization, pruning, changing soil and pots.
1, Chinese medicine residue is a good flower fertilizer.
The residue after decoction of traditional Chinese medicine is a good fertilizer for flower cultivation. Because most Chinese medicines are roots, stems, leaves, flowers, fruits and skins of plants, limbs, organs and shells of animals, and some minerals, which are rich in organic and inorganic substances. Nitrogen, phosphorus and potassium fertilizer needed for plant growth are all found in traditional Chinese medicine. Using Chinese medicine residue as fertilizer has many benefits for planting flowers and trees, which can improve the permeability of soil.
If Chinese medicine residue is to be used as flower fertilizer, it must be put into containers such as tanks and bowls, mixed with garden soil, soaked in water for a period of time, and then used after the residue decays into humus. Generally, the residue is put into the basin as the base fertilizer, or it can be directly mixed into the cultivation soil. Of course, it is not advisable to put too much residual fertilizer. Generally, the mixing ratio should not exceed one tenth, which will affect the growth of flowers and trees.
2. The magical use of vinegar
1. Raising southern flowers in the north and adding proper amount of vinegar when pouring basin soil can promote the absorption of trace elements such as phosphorus and iron and prevent yellowing of branches and leaves. 2. Spraying leaves and buds with 40% vinegar can increase the accumulation of photosynthetic products, increase flowers, make leaves greener and flowers more colorful. 3. Potted flowers with organic fertilizer will have a bad smell indoors. If proper vinegar is poured, it can not only eliminate the odor, but also sterilize the soil. 4, cotton balls dipped in vinegar to wipe the flowers and leaves, can make scale insects, red spiders, aphids and so on. And then sweep it down to eliminate it. 5. Spray alkaline drugs (stone sulfur mixture, Tujunte, thiram, etc.). Spraying proper amount of vinegar on branches and leaves can reduce phytotoxicity. 6. When preparing or applying alkaline drugs, wash hands and utensils with vinegar water, which can remove residual drugs and play a disinfection role.
3. Please make your own acid soil.
The acid pot soil needed for flower cultivation in the south and in the north can be made at home. Collect pine needle leaves, willow leaves and poplar leaves in autumn, put them in large flowerpots or black plastic bags, add a little ferrous sulfate or ferric citrate to one layer of leaves and one layer of peat soil or garden soil, soak them in water, cover them and compact them. After a fermentation in autumn and winter, acidic soil was made. Willow leaf fertilizer is most suitable for Milan, Gardenia, Osmanthus fragrans, Four Seasons Spring, Four Seasons Begonia, Guayeju and Cyclamen. Usually, the mixed solution of ferrous sulfate, ferric citrate and water is also helpful for maintenance. According to the ratio of spring 12: 6: 100 and summer: 6: 4: 100, then put it into a soft plastic bottle, bury the bottle in the soil, and screw the bottle cap tightly until it leaks slightly, so that the fertilizer solution can slowly penetrate into the soil.
4. It is good to plant flowers with bean curd residue as fertilizer.
Soybean residue is non-alkaline and is a high-quality fertilizer. Although it is the residue after pulping and juicing, it still contains a considerable amount of protein, vitamins and carbohydrates. After artificial treatment, it is most suitable for the growth of flower seedlings. The method of self-made bean dregs fertilizer is to put bean dregs into a jar and add 10 times of clear water for fermentation (about 10 days in summer and about 20 days in spring and autumn). Then add 10 times of clear water and mix well to water all kinds of potted flowers. The effect is really good. In particular, watering cactus flowers such as epiphyllum, lotus, crab claw orchid, overlord whip, cactus and cactus has better effect.
Step 5 make your own flower fertilizer
Deteriorated glucose powder is a good flower fertilizer. A small amount of mashed deteriorated glucose powder is mixed with clean water according to the ratio of 1: 100, and used for watering flowers and trees, which can promote the yellow leaves of flowers and trees to turn green and flourish. Suitable for chlorophytum, Rosa davurica, Evergreen, Phyllostachys pubescens, etc.
Taomi water and rotten tomatoes are fermented to make flower fertilizer. Taomi water and rotten tomatoes are put in a container and fermented to water flowers and trees, which will make them flourish.
Water the flowers with baking soda solution. Family flowers, when the flowers are in bud, watering them with baking soda solution of one ten thousand concentration will promote the flowers to flourish. Promoting the growth of moss in bonsai rocks with precipitated rice washing water. Put the rock bonsai in a damp place, and water the places where moss needs to grow with precipitated rice washing water every day. Under normal circumstances, 15-20 days can produce moss.
6. Beer is also a good fertilizer.
Beer has a good effect on flower cultivation, because it contains a lot of carbon dioxide, which is an indispensable substance for the metabolism of various plants and flowers, and beer contains nutrients such as sugar, protein, amino acids and phosphate, which is beneficial to flower growth.
1, water the flowers. Watering flowers with a proper amount of beer can make them grow vigorously, the leaves are green and the flowers are bright, which can not only make them get enough nutrients, but also absorb them very quickly. The specific method is to use water and beer according to ... >>
Question 5: How to cultivate potted jade unicorn 1. Use soil.
The requirements for soil are not strict, but it grows well in loose, breathable, moderate fertility, rich in organic calcium and granular weakly alkaline soil, with a pH value of 7-7.5. 50% vegetable garden soil, 20% fly ash, 20% coarse sand, 10% chaff, a small amount of bone meal and aged lime can be added. Disinfect with boiling water or drugs before use to kill spores, bacteria and various pests in the soil.
Second, add luster.
Because it is native to tropical Africa and the dry, hot and sunny areas in eastern India, it likes warmth and needs plenty of sunshine. It should be said that in addition to maintaining semi-shade in midsummer, we must ensure sufficient light at other times, especially in summer and autumn. Insufficient light is easy to cause abnormal stems to grow white and become columnar stems, which affects the ornamental effect. Winter and indoor viewing should also be placed in sunny places, otherwise the leaves will turn yellow and fall off. Turn the flowerpot frequently to make the plants grow evenly. Change pots every 1 ~ 2 years.
Third, thin and fat
Kirin palm doesn't like big fat. Based on the principle of thin fertilizer and less fertilizer, apply 1 times of thin compound fertilizer or fully decomposed vegetable dry water every month during the growth period, and apply 1 ~ 2 times of decomposed alum fertilizer as appropriate during the period to make the leaves more beautiful and lovely. If the amount of fertilization is too large and too shady, it will cause the plants to grow white and appear "atavism".
Fourth, drink less water.
Drought resistance, fear of water accumulation. You should not have too much water. You should master the principle of not watering, but you should water it in moderation. Too much watering will suffocate the roots. In summer and autumn, keep the basin soil slightly wet. Keep the soil dry all winter, so there is no need to water it.
Five, antifreeze
Not cold-resistant, when the temperature drops to 15℃, prepare for the world. Only when the room temperature is kept above 15℃, the leaves will not turn yellow, dry and fall off. Of course, if the room temperature can be kept above 8℃ and the pot soil is kept dry, it can be safely wintered.
Sixth, reproduction
Main cutting propagation, in May-June or August-September, the original seed sample is cut off from the thick columnar stem section at the lower part of the mother plant as cuttings, and the smaller the cut, the better. When the wound exudes white milk, it can be dipped in plant ash or charcoal powder and dried for 2-3 days. After the wound is slightly dry, it can be inserted into plain sand to keep it moist. Rooting can take place in about 45 ~ 55 days at 20 ~ 25℃.
Question 6: How to raise the unicorn palm, the raising method and matters needing attention of the unicorn palm, which is also called unicorn horn and jade unicorn. It is a foliage plant of Euphorbiaceae and Euphorbia. Kirin palm is native to eastern India.
Kirin palm is warm, which requires sun, drought and cold resistance, and is suitable for sandy loam with good drainage.
Maintenance method:
1. Lighting. Unicorns are satisfied with light. After leaving the house in early May, put it under the shade shed for 7 days to 10 days, and then
Keep it in a sunny place for maintenance. Insufficient light can easily lead to abnormal stems growing in vain and becoming columnar stems. special
During the growing period, we must ensure sufficient light, and we must not put it indoors for a long time. winter
Although dormant, plants still need photosynthesis to maintain basic life activities, so
Also put it in a sunny place, otherwise the leaves will turn yellow and fall off. Summer and autumn are the peak seasons for the growth of unicorn palms. It likes sunshine, but it shouldn't be exposed to it. If it is cultivated outdoors, you can use bamboo curtains to shade it.
2. Moisture. Kirin palm is drought-tolerant, and the principle of watering at ordinary times is rather dry than wet. Dangpen map
Hard and white, tapping on the basin wall, I heard the clear sound of pouring water. There is less water in winter than usual.
Less, at room temperature between 65438 05℃ and 65438 08℃, once every 65438 00 days or so. Watered
Many of them are not only prone to atavism, but also lead to root suffocation and death.
3. Fertilizer. Kirin palm doesn't like fertilizer very much. The principle of fertilizer supply is that it is better to be less than more, and lighter than thicker. basin
The soil can be mixed with humus, coal cinder and garden soil at the ratio of 65 and 438+0/3 respectively, and the less broken soil can be put into the basin.
Solid fertilizer is used as base fertilizer. During the growing season, apply 15% fully decomposed alum fertilizer once a month.
When applying fertilizer, avoid raw fertilizer and thick fertilizer, otherwise it will easily lead to rotten roots and fallen leaves. Fertilization can be stopped in winter dormancy, and then the normal fertilizer supply level will be gradually restored when the growth begins in the next spring.
4. temperature. Kirin palm is not cold-tolerant. Generally, the first cold current before the first frost should enter in the future.
Room. First of all, we should pay attention to indoor ventilation so that it can gradually adapt to the indoor microclimate. Even if it is warm in winter, you can't move outside to bask in the sun. If the room temperature can be kept above 15℃ in winter, the leaves will not fall; If the leaves have fallen, as long as the temperature is above 7℃, it can be safely wintered. In May of the following spring, you can also reopen the leaves.
5 cultivation. The propagation of unicorn palm adopts cutting method. From April to June every year, cut off the abnormal stems that grow vigorously and leave them for 3-4 days. After the wound shrinks, insert it into clean sand blasting for about 2-3 cm. Don't water it yet, spray a little water in a couple of days to keep the soil moist. After about a month, they can take root and transplant into flowerpots. Old Yin Jia Hai Shen provides you with the answer.
Question 7: How to raise unicorn flowers? Generally speaking, flowers and plants should be timely, suitable for land, humidity, temperature and light. That is to say, different conservation and management methods should be formulated according to the habits of each flower, whether it is watering, lighting, fertilization, pruning, changing soil and pots.
1, Chinese medicine residue is a good flower fertilizer.
The residue after decoction of traditional Chinese medicine is a good fertilizer for flower cultivation. Because most Chinese medicines are roots, stems, leaves, flowers, fruits and skins of plants, limbs, organs and shells of animals, and some minerals, which are rich in organic and inorganic substances. Nitrogen, phosphorus and potassium fertilizer needed for plant growth are all found in traditional Chinese medicine. Using Chinese medicine residue as fertilizer has many benefits for planting flowers and trees, which can improve the permeability of soil.
If Chinese medicine residue is to be used as flower fertilizer, it must be put into containers such as tanks and bowls, mixed with garden soil, soaked in water for a period of time, and then used after the residue decays into humus. Generally, the residue is put into the basin as the base fertilizer, or it can be directly mixed into the cultivation soil. Of course, it is not advisable to put too much residual fertilizer. Generally, the mixing ratio should not exceed one tenth, which will affect the growth of flowers and trees.
2. The magical use of vinegar
1. Raising southern flowers in the north and adding proper amount of vinegar when pouring basin soil can promote the absorption of trace elements such as phosphorus and iron and prevent yellowing of branches and leaves. 2. Spraying leaves and buds with 40% vinegar can increase the accumulation of photosynthetic products, increase flowers, make leaves greener and flowers more colorful. 3. Potted flowers with organic fertilizer will have a bad smell indoors. If proper vinegar is poured, it can not only eliminate the odor, but also sterilize the soil. 4, cotton balls dipped in vinegar to wipe the flowers and leaves, can make scale insects, red spiders, aphids and so on. And then sweep it down to eliminate it. 5. Spray alkaline drugs (stone sulfur mixture, Tujunte, thiram, etc.). Spraying proper amount of vinegar on branches and leaves can reduce phytotoxicity. 6. When preparing or applying alkaline drugs, wash hands and utensils with vinegar water, which can remove residual drugs and play a disinfection role.
3. Please make your own acid soil.
The acid pot soil needed for flower cultivation in the south and in the north can be made at home. Collect pine needle leaves, willow leaves and poplar leaves in autumn, put them in large flowerpots or black plastic bags, add a little ferrous sulfate or ferric citrate to one layer of leaves and one layer of peat soil or garden soil, soak them in water, cover them and compact them. After a fermentation in autumn and winter, acidic soil was made. Willow leaf fertilizer is most suitable for Milan, Gardenia, Osmanthus fragrans, Four Seasons Spring, Four Seasons Begonia, Guayeju and Cyclamen. Usually, the mixed solution of ferrous sulfate, ferric citrate and water is also helpful for maintenance. According to the ratio of spring 12: 6: 100 and summer: 6: 4: 100, then put it into a soft plastic bottle, bury the bottle in the soil, and screw the bottle cap tightly until it leaks slightly, so that the fertilizer solution can slowly penetrate into the soil.
4. It is good to plant flowers with bean curd residue as fertilizer.
Soybean residue is non-alkaline and is a high-quality fertilizer. Although it is the residue after pulping and juicing, it still contains a considerable amount of protein, vitamins and carbohydrates. After artificial treatment, it is most suitable for the growth of flower seedlings. The method of self-made bean dregs fertilizer is to put bean dregs into a jar and add 10 times of clear water for fermentation (about 10 days in summer and about 20 days in spring and autumn). Then add 10 times of clear water and mix well to water all kinds of potted flowers. The effect is really good. In particular, watering cactus flowers such as epiphyllum, lotus, crab claw orchid, overlord whip, cactus and cactus has better effect.
Step 5 make your own flower fertilizer
Deteriorated glucose powder is a good flower fertilizer. A small amount of mashed deteriorated glucose powder is mixed with clean water according to the ratio of 1: 100, and used for watering flowers and trees, which can promote the yellow leaves of flowers and trees to turn green and flourish. Suitable for chlorophytum, Rosa davurica, Evergreen, Phyllostachys pubescens, etc.
Taomi water and rotten tomatoes are fermented to make flower fertilizer. Taomi water and rotten tomatoes are put in a container and fermented to water flowers and trees, which will make them flourish.
Water the flowers with baking soda solution. Family flowers, when the flowers are in bud, watering them with baking soda solution of one ten thousand concentration will promote the flowers to flourish. Promoting the growth of moss in bonsai rocks with precipitated rice washing water. Put the rock bonsai in a damp place, and water the places where moss needs to grow with precipitated rice washing water every day. Under normal circumstances, 15-20 days can produce moss.
6. Beer is also a good fertilizer.
Beer has a good effect on flower cultivation, because it contains a lot of carbon dioxide, which is an indispensable substance for the metabolism of various plants and flowers, and beer contains nutrients such as sugar, protein, amino acids and phosphate, which is beneficial to flower growth.
1, water the flowers. Watering flowers with a proper amount of beer can make them grow vigorously, the leaves are green and the flowers are bright, which can not only make them get enough nutrients, but also absorb them very quickly. The specific method is to use water and beer according to ... >>
Question 8: How to raise the unicorn palm, the cultivation method and matters needing attention of unicorn palm Jade unicorn is one of the most primitive groups of cactus plants. It can absorb formaldehyde and benzene substances. Its leaves are green and beautiful, its stems and leaves are juicy, and its shape is elegant, just like the Kirin in the ancient legend of China, hence the name Jade Kirin. Jade Kirin likes sunshine, but it is resistant to semi-shade, and will not get up when it is slightly dry, so it is suitable for family potted viewing. Jade Kirin is generally propagated by cutting, and can be cut from April to10.
Yu Qilin likes soil with good drainage and air permeability. Potted plants should be well drained sand, not too fat. Potted soil can be made by drying and crushing fish pond mud and mixing it with 20% sand; Or 4 parts of garden soil, 4 parts of humus soil and 2 parts of sand. After planting the pot, water it. According to the actual situation in the future, watering every two or three days can be less than that of general broad-leaved trees, but slightly more than that of leafless cactus. Jade unicorn can apply light liquid fertilizer once a month during the growing period. Jade unicorn is not cold-tolerant. In China, except for some areas in South China and Southwest China, all other areas are potted plants, which are required to be placed in sunny rooms in winter. Generally, it will be moved indoors for the winter before the frost in the middle of June 5438+10/early October.
The white milk in the stem of Jade Kirin is toxic, especially to the eyes, so we should pay attention to prevent children from accidentally entering the mouth and eyes in family cultivation!
Question 9: How to raise unicorn flowers? Generally speaking, flowers and plants should be timely, suitable for land, humidity, temperature and light. That is to say, different conservation and management methods should be formulated according to the habits of each flower, whether it is watering, lighting, fertilization, pruning, changing soil and pots. 1, Chinese medicine residue is the residue after decocting Chinese medicine with good flower fertilizer, which is a good flower fertilizer. Because most Chinese medicines are roots, stems, leaves, flowers, fruits and skins of plants, limbs, organs and shells of animals, and some minerals, which are rich in organic and inorganic substances. Nitrogen, phosphorus and potassium fertilizer needed for plant growth are all found in traditional Chinese medicine. Using Chinese medicine residue as fertilizer has many benefits for planting flowers and trees, which can improve the permeability of soil. If Chinese medicine residue is to be used as flower fertilizer, it must be put into containers such as tanks and bowls, mixed with garden soil, soaked in water for a period of time, and then used after the residue decays into humus. Generally, the residue is put into the basin as the base fertilizer, or it can be directly mixed into the cultivation soil. Of course, it is not advisable to put too much residual fertilizer. Generally, the mixing ratio should not exceed one tenth, which will affect the growth of flowers and trees. 2. The magical effect of vinegar is 1. The flowers in the south are cultivated in the north, and proper amount of vinegar is mixed when pouring the pot soil, which can promote the absorption of trace elements such as phosphorus and iron and prevent the branches and leaves from yellowing. 2. Spraying leaves and buds with 40% vinegar can increase the accumulation of photosynthetic products, increase flowers, make leaves greener and flowers more colorful. 3. Potted flowers with organic fertilizer will have a bad smell indoors. If proper vinegar is poured, it can not only eliminate the odor, but also sterilize the soil. 4, cotton balls dipped in vinegar to wipe the flowers and leaves, can make scale insects, red spiders, aphids and so on. And then sweep it down to eliminate it. 5. Spray alkaline drugs (stone sulfur mixture, Tujunte, thiram, etc.). Spraying proper amount of vinegar on branches and leaves can reduce phytotoxicity. 6. When preparing or applying alkaline drugs, wash hands and utensils with vinegar water, which can remove residual drugs and play a disinfection role. Please make your own sour soil, you can do it at home. Collect pine needle leaves, willow leaves and poplar leaves in autumn, put them in large flowerpots or black plastic bags, add a little ferrous sulfate or ferric citrate to one layer of leaves and one layer of peat soil or garden soil, soak them in water, cover them and compact them. After a fermentation in autumn and winter, acidic soil was made. Willow leaf fertilizer is most suitable for Milan, Gardenia, Osmanthus fragrans, Four Seasons Spring, Four Seasons Begonia, Guayeju and Cyclamen. Usually, the mixed solution of ferrous sulfate, ferric citrate and water is also helpful for maintenance. According to the ratio of spring 12: 6: 100 and summer: 6: 4: 100, then put it into a soft plastic bottle, bury the bottle in the soil, and screw the bottle cap tightly until it leaks slightly, so that the fertilizer solution can slowly penetrate into the soil. 4. As a fertilizer for flower cultivation, bean curd residue is a kind of high-quality fertilizer, which is non-alkaline. Although it is the residue after pulping and juicing, it still contains a considerable amount of protein, vitamins and carbohydrates. After artificial treatment, it is most suitable for the growth of flower seedlings. The method of self-made bean dregs fertilizer is to put bean dregs into a jar and add 10 times of clear water for fermentation (about 10 days in summer and about 20 days in spring and autumn). Then add 10 times of clear water and mix well to water all kinds of potted flowers. The effect is really good. In particular, watering cactus flowers such as epiphyllum, lotus, crab claw orchid, overlord whip, cactus and cactus has better effect. 5, self-made flower fertilizer deteriorated glucose powder is a good flower fertilizer. A small amount of mashed deteriorated glucose powder is mixed with clean water according to the ratio of 1: 100, and used for watering flowers and trees, which can promote the yellow leaves of flowers and trees to turn green and flourish. Suitable for chlorophytum, Rosa davurica, Evergreen, Phyllostachys pubescens, etc. Taomi water and rotten tomatoes are fermented to make flower fertilizer. Taomi water and rotten tomatoes are put in a container and fermented to water flowers and trees, which will make them flourish. Water the flowers with baking soda solution. Family flowers, when the flowers are in bud, watering them with baking soda solution of one ten thousand concentration will promote the flowers to flourish. Promoting the growth of moss in bonsai rocks with precipitated rice washing water. Put the rock bonsai in a damp place, and water the places where moss needs to grow with precipitated rice washing water every day. Under normal circumstances, 15-20 days can produce moss. 6. Beer is also a good flower fertilizer, so it has a good effect because it contains a lot of carbon dioxide, which is an indispensable substance for the metabolism of various plants and flowers. Beer contains nutrients such as sugar, protein, amino acids and phosphate, which is beneficial to the growth of flowers. 1, water the flowers. Watering flowers with a proper amount of beer can make them grow vigorously, the leaves are green and the flowers are bright, which can not only make them get enough nutrients, but also absorb them very quickly. The specific method is to use water and beer according to ... >>
Question 10: How to cut the unicorn's paw is very simple.
Cut it from the rotten place, then cut it for a short time and put it in a cool place to dry the wound (about 2 ~ 3 days). In the meantime, prepare a pottery basin or clay basin, stick tiles or screens on the drainage holes, and put clean sand in it. The sand should not be too fine or have large particles larger than 1 cm, and then use 1000 times potassium permanganate solution or 500 times bacteria.
Insert the dry wound into the sand for 3 ~ 5 cm, then pour clean water and cure it under scattered light. Spray water on the leaves at the beginning, and be careful not to spray too much. The sand is dry, water it again.
After 2 weeks, it can be cured in the sun.
It can be managed normally after 4 weeks.