The interfacial agent is coated with foam roller and mixed with water according to the ratio of 1: 1. The dosage per square meter is about100-150g. After the interface agent is painted, wait 1-3 hours, keep good ventilation and make it completely dry. Then carry out self-leveling construction. Ordinary self-leveling price is very cheap, about 100/flat, which is more cost-effective than floor tiles. Epoxy resin self-leveling is not suitable for families, and it is basically used in parking lots. Like cement powder, Pandora magic may be much more expensive. Cement self-leveling needs curing, and silicate cement for home improvement needs time to dry and solidify. During this period, it is necessary to water and maintain the ground every day. Once the maintenance is not good, the ground will crack, which is the nature of cement and there is no way.
Cement self-leveling construction requires high environment. Before and after construction, the site should be closed to prevent foreign matters such as dust from entering, and self-leveling should also be prevented from being blown out by the wind during drying. The temperature should be controlled at 5~35℃ and the relative humidity should not be higher than 80%. After the construction is completed, the cement self-leveling floor cannot be used directly, and it needs surface treatment, such as RCC curing agent, cement antique paint and other materials. Clean the floor thoroughly, preferably with a damp mop, or the pebbles will be sealed underground in the future, and the mat is only 5mm thick, and the pebbles will definitely protrude.