There will be such a hidden danger. The main reasons for peeling are: peeling of paint layer during the later construction of wall. For example, there is water on the other side of the wall for a long time, which leads to moisture regain when the wall is painted, and the indoor humidity is high. The treatment method is as follows: according to the above situation, shovel off the paint layer and suffer after it rains.

Tide, need to pay attention to when painting, ventilate the room and repaint the walls.

Processing method.

1, the thickness of a painting cannot be too thick. Treatment of the inner side of the post-treatment wall.

2. Fill the hole with cement mortar with a higher label and find out where there is water seepage on the other side of the wall.

3. The construction is also carried out by a method similar to 1 (1 days ago).

1. Will the integrated wall conduct electricity?

At the beginning, the first generation of aluminum alloy integrated wall used aluminum layer, and the integrated wall began to upgrade to bamboo fiber integrated wall. Because this kind of integrated wall adopts bamboo fiber, low-carbon development and polymer waterproof and fireproof materials, whether the integrated wall will conduct electricity is mainly caused by the material of the wall, and the aluminum foil is pressed and oxidized for three layers. With the development of the industry, the shortcomings of these integrated walls have been gradually improved and eliminated, and the second generation of bamboo-wood fiber integrated walls have indeed solved many shortcomings. Suitable for future environmental protection, the aluminum layer is soft and impact-resistant, and the appearance of this material is hello. Generally speaking, the foam layer is inconvenient to transport. Therefore, there is oxidation and radiation of aluminum layer, which effectively solves the shortcomings of conductivity, inconvenient modeling, metal conductivity, difficult modeling and metal radiation since 20 1 1. Hello, whether the integrated wall will conduct electricity is mainly caused by the material of the wall, because the first generation of aluminum alloy integrated wall is aluminum layer, foam layer and aluminum foil. Therefore, there is aluminum layer oxidation, metal radiation, metal conduction, and the aluminum layer is soft and does not collide.

It is said that the bamboo-wood fiber integrated wall expands when heated and contracts when cooled.

Thermal deformation temperature: 70℃. There is no obvious melting point, it begins to soften at 85 ~ 90℃, and 130℃ presents plasticity. You can use it safely.

The decoration of Qiaoxiangnan Yangshengtang attaches great importance to safety and environmental protection, and the materials used are all high environmental protection materials, which can be installed immediately and live immediately, rejecting health hazards.

Solid wood will expand with heat and contract with cold, and the wall surface has little effect, which can be ignored.