1, locker room
The dressing room is an important part of the spa club and an indispensable part of bathing and recuperation. Therefore, the requirements for the locker room should be particularly strict. The size and quantity of dressing rooms should meet the needs of customers during peak hours. Considering the influence of local cold and off-season factors, the dressing room should have the function of partition management to avoid wasting unnecessary management resources in off-season. The carpet in the dressing room should have antibacterial function, adopt indirect warm light and have centrally controlled background music.
2. dressing room
The minimum area of the dressing room should not be less than 3 square meters, and there should be doors or curtains, stools, clothes hooks, mirrors, etc.
3. dressing area
It should be divided into several small dressing areas to achieve semi-private effect. There should be a lockable cabinet nearby, and the trash can should be hidden, preferably embedded, with a warm top and high brightness. There should be wall lamps to prevent facial shadows.
4. Bathroom
Independent area, with toilets for the disabled.
5. Bathing area
There should be a multi-functional bathing area with an area of/kloc-0.000 square meter, a multi-functional shower head with spa function, and more than 40 shower rooms used by more than 40 people at the same time. In style, the combination of light-transmitting closed cloth and single-sided open cloth can be used. There should be three or more steam baths to provide steam baths with different functions for guests with different needs. The total dry/wet steam area of each steam bathroom shall not be less than 30m2. All indoor rooms are made of waterproof and mildew-proof materials, and the ceiling must be made into an arched dome to prevent water droplets from falling on the guests. If there is a gas nozzle, the gas nozzle should be far away from the guest's activity range and protected with a protective cover. The door should have a perspective window, which can observe the inside and has a sealing function.
6. Foam pool
There should be more than two hot spring pools and cold spring pools with strong water column, sitting and lying, and the style should be landscape design. Never be too monotonous. It is necessary to combine the local seaside characteristics. Waterproof materials such as floor tiles or Shi Zhuan have anti-slip function, and underwater lamps can be waterproof. The edge of the bubble pool is flush with the ground in the wet area. Above the ground, there should be non-slip steps and handrails. There should be a water outlet on the wall of the pool, at least two water outlets at the bottom of the pool, and a filter screen at the edge of the pool. The water outlet should be beautiful and practical, without recharging.
The water temperature of hot spring pool is 27-36℃, and that of cold spring pool is 13- 18℃. It is necessary to install heat exchange equipment and adjust the water temperature appropriately according to different seasons and climates, so as to be comfortable.
7. Geothermal steam room or sauna room
The area is not less than 100 square meter, and there are automatic time and temperature control procedures, operation tips and safety tips next to it. The fresh air inlet is under the heater, the exhaust port is near the roof, and the alarm bell is indoors near the entrance.
8. Layout
In layout, the steam room should be adjacent to the sauna room, foam pool and bath room to avoid facilities passing through the dry area, and different areas should be separated accordingly. The foam pool should be close to the steam bathroom, nursing room and bathing room. A scientific air circulation system should be provided to control the humidity and temperature of the air, so as to prevent the humidity and high temperature in humid areas from entering dry areas. There must be at least two rest areas, a chair and a coffee table. 9. Decoration
In the selection of materials for floors and walls, priority should be given to stone, with good lighting and sufficient light, and the best design should be artistic.
10, necessities
Hot spring introduction publicity materials; Drinking machine, paper cup; List of discomfort symptoms; Bath products (shampoo, shower gel, skin care lotion, conditioner, bath soap, etc.). ); Cosmetics (combs, hair dryers, skin care products, cotton swabs, gel cream, etc.). ).
Display of decoration effect diagram of hot spring club
Hot spring club decoration renderings 1
Decoration effect of hot spring club Figure 2
Decoration effect of hot spring club Figure 3