Current location - Health Preservation Learning Network - Health preserving class - Steps of interior wall plastering What are the common problems in interior wall plastering?
Steps of interior wall plastering What are the common problems in interior wall plastering?
Interior wall plastering is the first step of mud brick construction. Interior wall plastering is mainly to ensure the firm bonding of plastering, avoid the shell and crack of plastering layer and ensure the quality of plastering, but interior wall plastering is prone to quality problems. Then, let's introduce the steps of interior wall plastering and what are the common problems of interior wall plastering.

Internal wall plastering step

1, grassroots cleaning

Thoroughly clean the base, repair the uneven parts of the wall and keep the wall clean and tidy.

2, the wall is wet

Let the wall base absorb water, first of all, the day before plastering the wall, and then water the wall to make it wet after it is cleaned.

Step 3 hang the net and throw the hair

In order to prevent the wall from cracking, steel wire mesh can be hung on the wall of concrete and aerated block.

4. Find the rules and paste ash cakes.

After the plastering thickness of the wall is determined, paste the ash cake by hanging lines, square feet and drawing lines.

5, do corner protector, screed

Before plastering the wall, protect the corners of doors, windows, cylinders, etc.

What are the common problems in plastering interior walls?

1, weak adhesion, hollowing and cracks.

When plastering the interior wall, it is sometimes found that the plastering layer is not firmly bonded with the matrix, which leads to problems such as hollowing and cracks. This is mainly due to insufficient cleaning and wetting of the base, and uneven shrinkage stress is generated during the hardening process of mortar strength growth, thus forming the phenomenon of drying shrinkage cracks.

2. The plastering layer is too thick

The plastering layer will be too thick during construction. At this time, the plastering layer can be cracked, and the thickness of the plastering layer can be controlled within a certain range, and kept at about 20 mm During operation, it should be plastered intermittently by layers, and the plastering can be carried out for the second time after the first time of ash solidification. Never do it all at once.

3. The side seams of door and window frames are not filled with ash or not.

When plastering the interior wall, it is easy to have problems such as hollowing and cracks on both sides of the window frame, so in order to avoid this situation, the joints of doors and windows should be handled by someone.