People will find a problem when they buy air humidifiers. Some air humidifiers are very expensive, but sometimes we spend very little time using them. What shall we do? In fact, as long as we have certain materials, we can make our own air humidifier. The cost of self-made air humidifier is low and the manufacturing method is very simple. Want to know the method of self-made air humidifier? Come and have a look with me.

Detailed explanation of the method of self-made air humidifier Chapter 65438 +0 method 1:

1. When making an air humidifier, you should first prepare a large beverage bottle, a fine needle and an old plastic bowl.

2. Punch a few small holes in the beverage bottle with the prepared fine needle, and the eye of the needle should not be too big.

3. Put the beverage bottle into the prepared plastic bowl so that the bottom of the beverage bottle is close to the plastic bowl.

4. Inject a proper amount of water into the beverage bottle. If the injected water is not ejected, it means that the water is added successfully.

5. Cover the beverage bottle. The water in the beverage bottle flows out slowly, and the plastic bowl is full of water, which shows that your air humidifier has been made successfully.

Method 2:

1. Buy an atomizer in the market and connect it with the transformer.

2. Then put the atomizer in a tray filled with water. The water in the tray must not pass through the atomizer to avoid dry burning.

3. After the atomizer is put into the water, the water will spray upwards. A plastic bracket is also placed in the box of the atomizer, which is used to place water-resistant glass above the humidifier. Can prevent the humidifier from splashing in the humidifying process.

Note: This method of using self-made air humidifier is not very firm in fixing the core, which may easily lead to the phenomenon that the core is out of water and the connection position between the core and the power cord is loose. It's best to get it done at once.

Method 3:

After introducing the general manufacturing method of humidifier, I will now introduce the manufacturing method of ultrasonic air humidifier.

1. First, buy an ultrasonic atomizer in the market. At the same time, prepare a CD box, a small fan and a power supply.

2. Then turn the lid of the CD box upside down, add water, and put the atomizer in the CO box cover.

3. Plug in the power supply and try the effect of self-made air humidifier.

4. Then install the fan and open a small hole on the opposite side of the fan. When the fan is running, the mist generated by the humidifier can be blown out to increase the humidification effect. At the same time, when the fog sinks, water droplets will drop on the floor, making the floor moist.

Finally, cover the lid and turn on the power supply, and you can see the fog coming out of the small hole, and the' step' of self-made air humidifier is completed.

Detailed explanation of the method of self-made air humidifier Part II: Method of self-made air humidifier 1, light bulb energy recovery

Compared with the air humidifiers sold in the market, this homemade air humidifier is more exquisite and unique. This kind of air humidifier not only meets the visual aesthetic feeling, but also uses the heat conversion generated by the light bulb as the working power of the humidifier, thus turning water into steam and constantly emerging from the "small chimney" to increase the indoor air humidity.

The second method of self-made air humidifier is to use coke bottles.

This method is more suitable for use in the north, mainly using the heating in the north to evaporate the water in the coke bottle, thus increasing the humidity in the air. This method is very simple and easy to operate, and many netizens have shared it. The specific method is:

Cut out a large coke bottle filled with water, and hang the coke bottle filled with water upside down on the radiator with iron wire to ensure that the water will evaporate into steam with the increase of temperature, thus increasing the moisture in the air and alleviating the air dryness.

Method of self-made air humidifier 3. Use an ultrasonic atomizer.

This method mainly uses ultrasonic ions generated by ultrasonic atomizer to spray water into the air through pneumatic device to achieve the purpose of humidifying the air. The specific method is as follows:

Find a basin with a relatively large opening, put two-thirds of purified water into a plastic box, put the ultrasonic atomizer into water, and turn on the power. This is because dense and uniform fog will be formed around the ultrasonic atomizer and distributed in the air to achieve the purpose of humidifying the air. At this time, if you want to make the air full of fragrance, you can put some scented things such as petals in the water. Soon, the air will no longer be dry, and there will be a fragrance that doesn't seem to exist. This is killing two birds with one stone!