Camax treadmill is a kind of exercise and fitness equipment, and it also belongs to high-end fitness equipment. However, due to long-term use or other reasons, the treadmill may malfunction. Most fault codes refer to codes and prompts that appear on the treadmill display. The following are common fault codes of Camax treadmills and their solutions.

1.E 1: motor 1 or circuit board failure.

If the E 1 fault code appears on the treadmill display, the motor 1 or the circuit board is faulty. At this time, you need to contact maintenance personnel for maintenance, or plug and unplug the wiring of the circuit board again to try to solve the problem.

2.E2: Motor 2 or circuit board failure

If an E2 fault code appears on the treadmill display, it means that the motor 2 or the circuit board has failed. At this time, you need to contact maintenance personnel for maintenance, or plug and unplug the wiring of the circuit board again to try to solve the problem.

3.E3: Sensor failure or open circuit

If the E3 fault code appears on the treadmill display, it means that it may be caused by a faulty sensor or an open circuit. First of all, you need to check whether the fault sensor and the connecting wire are connected correctly. If the problem still cannot be solved, it is recommended to contact professional maintenance personnel for maintenance.

4.E4: Calibration error

If the E4 fault code appears on the display of the treadmill, it means that there is an error in the calibration of the treadmill. Please recalibrate the treadmill and check whether the corresponding sensors are marked in the corresponding areas.

5.E5: overload protection

If the E5 fault code appears on the display of the treadmill, it means that the treadmill has overload protection function. The specific reason may be that the athlete's weight exceeds the machine load and needs to stop and recalibrate.

6.E6: Shutdown failure

If the E6 fault code appears on the treadmill display, it means that the treadmill has encountered a shutdown fault. At this time, it is necessary to check whether there is overload or emergency braking is normal, and keep a safe distance to avoid injury.

Generally speaking, when encountering the above fault codes or other fault problems, we need to take troubleshooting steps first. If the problem cannot be solved, it is recommended to contact professional maintenance personnel for maintenance. At the same time, in order to prolong the service life of the treadmill, we also need to pay attention to daily maintenance, check and clean the treadmill regularly, and use the treadmill reasonably.