Tools/materials: 1 military training belt.

1. Prepare a belt with an iron plate and two fixing buttons.

2. Fold the part of the belt without loop buckle in half, and adjust the length of the fold according to the size of your waist.

3. Insert the iron sheet into the buckle, and the iron sheet and the buckle just fit.

4. Then place the fixing ring near the middle iron sheet to fix the folded part of the belt.

Matters needing attention in installing plastic buckle of military training belt

1, pay attention to whether the model of plastic buckle matches the aperture of belt.

If it does not match, it may be that the belt buckle is not firmly fixed, or the belt buckle is too tight to adjust the belt length.

2. Insert the tip of the plastic buckle into the first hole of the belt.

This is a very important step, because if the tip of the buckle is not inserted in the correct position, it may cause the buckle to fall off or be improperly adjusted.

3, pay attention to adjust the length of the belt.

When adjusting, align the adjustment opening of the plastic buckle with the position marked on the belt, then press the buckle with one hand and tighten the belt with the other hand until the belt length is appropriate. Then, press the buckle with one hand, and turn the gear of the adjusting port with the other hand to fix the belt in a proper position.