Fault codes help solve the problems of treadmills, which can be divided into the following categories:
I. Ministry of Communications
0 1 speed
02 walk
03 slope
Second, the electrical sector.
04 fault maintenance
05 acquisition board
3. Motor system, including weighing system
06 Lock rotor switch
07 circuit breaker
08 conveyor belt
According to the above types:
1. Communication department
0 1 speed
The common speed faults of treadmill with inconsistent running speed are mainly the accelerator and reducer.
The solution can be to carefully check whether the accelerator and reducer are working properly and confirm whether the connection is loose or damaged.
02 walk
Walking failure means that the treadmill can't walk normally.
The solution can be to adjust the tightness of the machine walking system to ensure that they are installed correctly. You can check the user manual to make sure that the link is correct.
03 slope
Slope failure means that the slope of the machine can't work normally, or there are some abnormal situations.
If you encounter such a problem, please check whether the slope motor and slope sensor are working normally, and manually adjust the digital slope.
2. Electrical department
04 fault maintenance
Fault maintenance refers to some vague mistakes or maintenance problems in the treadmill.
The solution can be to unplug the treadmill from the power supply and check whether the cable is connected correctly, confirm whether the circuit is faulty or pay attention to the maintenance of the treadmill.
05 acquisition board
The acquisition board means that the treadmill cannot recognize movement or stop data recording.
The solution can be to check the near-infrared photoelectric sensor of the treadmill and remove the motion sensor to ensure that it is always clean.
3. Motor system, including weighing system
06 Lock rotor switch
Locking the rotor switch means that the treadmill stops because the motor is locked.
The solution can be to manually turn the motor to deal with the resistance and clean up any blocked parts.
07 circuit breaker
Circuit breakers, also known as treadmill safety switches, appear when users accidentally step out of the treadmill.
The solution can be to adjust the switch, remove anything that may cause the activity area to be blocked, and ensure that the user uses the treadmill correctly.
08 conveyor belt
A conveyor belt failure means that the treadmill conveyor belt is not working properly.
The solution can be to carefully check the connection and hook of the conveyor belt, which may lead to this problem if the passage is blocked. Please keep the room and treadmill clean and tidy.
The above are the common fault codes of treadmills. By identifying the fault code and taking corresponding measures to solve it, the running of the treadmill can be ensured to be more efficient and safe. Of course, we should always pay attention to the use and maintenance of the treadmill, otherwise the problem will be solved immediately, and the problem will appear again and again.