Feijian treadmill is one of the common family fitness equipment in the market, but some faults will inevitably occur during use. The following lists some possible faults of Feijian treadmill and the corresponding fault codes:

1.E0 1: Motor failure. This may be caused by motor blockage or damage. If this fault code appears, it is necessary to check whether the motor has abnormal sound or abnormal operation, and contact maintenance personnel in time if necessary.

2.E02: Electric control board failure. This may be caused by damage to the electric control board or loose wiring. If this fault code appears, you can first check whether the electric control board and wiring are damaged or loose, and contact maintenance personnel if it is not necessary.

3.E03: Speed sensor failure. This may be caused by poor contact or damage of the speed sensor. If this fault code appears, you can first check whether the connecting wire of the speed sensor is loose or disconnected, and contact the maintenance personnel if it is not necessary.

4.E04: Tilt sensor failure. This may be caused by poor contact or damage of the tilt sensor. If this fault code appears, you can first check whether the connecting wire of the tilt sensor is loose or disconnected, and contact the maintenance personnel if it is not necessary.

5.E05: overload protection. This may be caused by the overload of the treadmill or the unstable motor voltage. If this fault code appears, you need to shut down the treadmill for a while and then restart it. If this problem persists, you need to contact maintenance personnel.

The above are some possible faults of Feijian treadmill and the corresponding fault codes. When using the treadmill, we should pay attention to the correct use and avoid unnecessary failures. If there is any fault, you should contact the manufacturer or maintenance personnel in time for maintenance.